Luger Firing Pins

aldo35 · 08-15-2012, 12:03 AM

Hi,

I have two firing pins that are slightly different. One has a long piece that that extends beyond pin body,( this the piece that engages the center link when cocking), on the other one this piece is shorter and ends at the end of the pin body. .

Neither one is numbered.

Aldo35

sheepherder · 08-15-2012, 06:52 AM

Pictures are necessary.

Lugerdoc · 08-15-2012, 10:02 AM

Also, The FP with the shorter "arm" is mostly likely from a M29 Swiss, and would be marked with a cross (+) on the right side of the arm, or if unmarked, from a 1970s Mauser Parabellum. TH

aldo35 · 08-15-2012, 05:55 PM

Tom,

You are correct, there is a small cross on the right arm. This FP was probably in a bunch of parts I purchased in the 60's from a gunstore in Zurich. There are also two grooves or channels on the surface of this FP.

In your experience will this work in either a WWII P08 or a prewar P06?

Aldo35

aldo35 · 08-15-2012, 06:02 PM

Hi,

Attached is a picture of these firing pins. The cross appears as a tiny spec on the lower FP arm. You can also make out the groove on this side of pin there is a identical groove on the other side. .

Aldo35

Lugerdoc · 08-16-2012, 08:32 AM

Aldo, Your M29 Swiss FP should work well in most luger models, except the ones prior to 1906. TH

aldo35 · 08-16-2012, 10:01 PM

Tom,
Thanks.
Aldo35

08-15-2012, 12:03 AM	#1
aldo35 User Join Date: Jul 2010 Location: Northern GA Posts: 390 Thanks: 2,298 Thanked 184 Times in 91 Posts	Luger Firing Pins Hi, I have two firing pins that are slightly different. One has a long piece that that extends beyond pin body,( this the piece that engages the center link when cocking), on the other one this piece is shorter and ends at the end of the pin body. . Neither one is numbered. Aldo35

08-15-2012, 06:52 AM	#2
sheepherder Lifer Lifetime Forum Patron Join Date: Feb 2009 Location: ...on the 'ol Erie Canal... Posts: 8,197 Thanks: 1,416 Thanked 4,462 Times in 2,336 Posts	Pictures are necessary. __________________ I like my coffee the way I like my women... ...Cold and bitter...

08-15-2012, 10:02 AM	#3
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Also, The FP with the shorter "arm" is mostly likely from a M29 Swiss, and would be marked with a cross (+) on the right side of the arm, or if unmarked, from a 1970s Mauser Parabellum. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

08-15-2012, 06:02 PM	#5
aldo35 User Join Date: Jul 2010 Location: Northern GA Posts: 390 Thanks: 2,298 Thanked 184 Times in 91 Posts	Firing Pin Picture Hi, Attached is a picture of these firing pins. The cross appears as a tiny spec on the lower FP arm. You can also make out the groove on this side of pin there is a identical groove on the other side. . Aldo35 Attached Thumbnails

08-16-2012, 08:32 AM	#6
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Aldo, Your M29 Swiss FP should work well in most luger models, except the ones prior to 1906. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

08-15-2012, 05:55 PM	#4
aldo35 User Join Date: Jul 2010 Location: Northern GA Posts: 390 Thanks: 2,298 Thanked 184 Times in 91 Posts	Tom, You are correct, there is a small cross on the right arm. This FP was probably in a bunch of parts I purchased in the 60's from a gunstore in Zurich. There are also two grooves or channels on the surface of this FP. In your experience will this work in either a WWII P08 or a prewar P06? Aldo35

08-16-2012, 10:01 PM	#7
aldo35 User Join Date: Jul 2010 Location: Northern GA Posts: 390 Thanks: 2,298 Thanked 184 Times in 91 Posts	Tom, Thanks. Aldo35