LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > Luger Discussion Forums > Lugerforum Archive

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-15-2002, 09:58 PM   #3
Thor
User
 
Thor's Avatar
 
Join Date: Jun 2002
Location: Rio Rancho, New Mexico
Posts: 4,583
Thanks: 958
Thanked 971 Times in 277 Posts
Default Re: 7.65 parabellum

I agree with Kyrie, the winchester loading is too hot. The Sako/Lapua sounds like the best bet. I have had good luck with the Hornady .308 diameter bullet though I seem to remember most of the diameters I have sluged were miking .310". The one thing that is important for reloads to know is that both sets of reloading dies I bought, one the RCBS die and a LEE set did NOT have the correct diameter expander plug for the .308" bullets which resulted in them being pushed back into the cartridge case during the loading sequence. I contacted both manufacturers and RCBS basically ignored me but the LEE company sent me a correct diameter expanding plug for FREE! Now I reload with no problems. I have an box of FIOCCHI that I use for shooting the first trials to test the action as it is underpowered and I dont want to hammer the action. Then I can adjust my handloads to work for that particular gun. What a neat fun caliber and accurate! Thor



Thor is offline  
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:08 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2026, Lugerforum.com