Breech block not closing

Olle · 07-16-2012, 10:10 PM

Got her going now! It seems like this pistol had multiple problems:

-The breech block was binding a bit and needed to be fitted.
-The mainspring was old and weak, so I replaced it with a Wolff std weight.
-The magazine lips were set too wide, got it to feed flawlessly with an aftermarket mag.
-The gun would not c o c k (can the moderators please allow this word...?), but Hugh's trigger fix took care of that.

So there's another FrankenLuger ready for action, and I learned a lot in the process. I sure appreciate the help!

07-16-2012, 10:10 PM	#24
Olle User Join Date: Feb 2010 Location: Tennessee Posts: 1,149 Thanks: 159 Thanked 664 Times in 318 Posts	Got her going now! It seems like this pistol had multiple problems: -The breech block was binding a bit and needed to be fitted. -The mainspring was old and weak, so I replaced it with a Wolff std weight. -The magazine lips were set too wide, got it to feed flawlessly with an aftermarket mag. -The gun would not c o c k (can the moderators please allow this word...?), but Hugh's trigger fix took care of that. So there's another FrankenLuger ready for action, and I learned a lot in the process. I sure appreciate the help!