LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > General Discussion Forums > Repairs, Restoration & Refinishing

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-11-2012, 08:58 PM   #10
mrerick
Super Moderator - Patron
LugerForum
Life Patron
 
mrerick's Avatar
 
Join Date: Dec 2009
Location: Eastern North Carolina, USA
Posts: 3,920
Thanks: 1,377
Thanked 3,135 Times in 1,518 Posts
Default

Olle, The fit of the toggle train in the receiver is generally quite close, but smooth. The tolerances were low and they were hand fit at the factory.

As mentioned in an earlier post, it is possible that someone inadvertently "adjusted" the receiver tighter by clamping it in a vise. It's worth a look at the barrel to receiver witness mark (on the bottom) to see if it lines up perfectly and if it's ever been disturbed by someone re-mounting the barrel.

The toggle train movement should be very smooth, and not feel like there is resistance as it completes going into battery. If it closes smoothly without a cartridge in the chamber, but encounters resistance with one in the chamber (even a fired case) then look more to the extractor as it climbs over the cartridge edge.

The use of lapping compound to polish the fit is a question for the more experienced Luger gunsmiths...

Marc
__________________
Igitur si vis pacem, para bellum -
- Therefore if you want peace, prepare for war.
mrerick is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:31 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Lugerforum.com