Malfunction loading 7.65 Para

alanint · 04-15-2012, 03:01 PM

Your sear is not resetting. Remove and clean the sear and see if the small plunger at the front is moving freely. In the past, I have taken a dremel with a polishing wheel and have slightly broken the edge of the plunger by polishing. This is the edge which faces out when installed in the pistol. By polishing the outer edge of the plunger, it helps it to ride over the trigger lever and reset properly.

04-15-2012, 03:01 PM	#24
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,917 Times in 1,193 Posts	Your sear is not resetting. Remove and clean the sear and see if the small plunger at the front is moving freely. In the past, I have taken a dremel with a polishing wheel and have slightly broken the edge of the plunger by polishing. This is the edge which faces out when installed in the pistol. By polishing the outer edge of the plunger, it helps it to ride over the trigger lever and reset properly.