Haenel Magazine Design

Lugerdoc · 12-02-2011, 12:07 PM

GT, Originally I thought that the 90d bottom cut had something to do with the extrusion process, but now I see that his earlier nickeled extruded mags that are pinned at the rear and are angle cut as are the folded mags. So you may be correct stating the cause to be the change in springs, but the fact that the retaining pin does not have to go into the mag well and can be peened over, seems to me to be of great benefit both in reliability and ease of production. TH

12-02-2011, 12:07 PM	#11
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	GT, Originally I thought that the 90d bottom cut had something to do with the extrusion process, but now I see that his earlier nickeled extruded mags that are pinned at the rear and are angle cut as are the folded mags. So you may be correct stating the cause to be the change in springs, but the fact that the retaining pin does not have to go into the mag well and can be peened over, seems to me to be of great benefit both in reliability and ease of production. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net