fxo mag

Herb · 02-07-2002, 09:55 PM

The FXO I have is made of extruded steel with an aluminum bottom with no number. On the left side just above the aluminum bottom piece is a small three feathered eagle over 37 and immediately above that is fxo. On the other side (still on the left) to the right of the bottom piece is P08 stamped vertically and facing the outer edge. The bottom piece has a steel pin running through it that goes all the way through. The loading pin is knurled and the spring is the newer zig-zag type. The follower appears to be steel. No other marking appears on it.

02-07-2002, 09:55 PM	#5
Herb User Join Date: Jun 2002 Location: Utah, in the land of the Sleeping Rainbow Posts: 1,457 Thanks: 0 Thanked 1 Time in 1 Post	Re: fxo mag The FXO I have is made of extruded steel with an aluminum bottom with no number. On the left side just above the aluminum bottom piece is a small three feathered eagle over 37 and immediately above that is fxo. On the other side (still on the left) to the right of the bottom piece is P08 stamped vertically and facing the outer edge. The bottom piece has a steel pin running through it that goes all the way through. The loading pin is knurled and the spring is the newer zig-zag type. The follower appears to be steel. No other marking appears on it.