Huge collection Appraised - Page 2

Ardennes · 09-08-2010, 10:56 PM

Jamese is correct. It's not difficult to figure out where the cries of "advertising" are coming from. This was a once-in-a-lifetime opportunity and I'm sure several people would like to have been chosen for the job. Legacy was chosen and has every right to be proud of that fact. No doubt other establishnents were in the running and several factors considered before the final decision was made. The folks at Legacy no doubt are ever grateful to all those who may have been influential in that decision.

John Van Sandt · 09-12-2010, 10:23 AM

Ed,
My jaw dropped and drool was prolific when I saw the pictures. Congrats on the assignment!!!
I am new to this and just cannot believe the prices. I remember finding Lugers for $50 each when I was in college and could not afford a down payment on a free meal.
One can only hope when some of these go up for sale they will be listed here
I am still looking for a 9mm in good shape at a reasonable price

73
John

Edward Tinker · 09-12-2010, 10:31 AM

John, lots of folks are putting in 'bids" for the inventory, as its being sold as an entire lot.

Whoever gets them will have to sell them somewhere, at shows, on-line etc?

I first started reading about lugers in the 70's as a teen, but my first bought luger was a reblued artillery for $350 in 1983 and then a few yrs later a mismatch for $350 (over paid on that one)

Ed

Edward Tinker · 09-27-2010, 03:09 AM

Off the subject, but I know will be read by folks.

I upgraded to Microsoft Publisher 2010. I know some folks don't like it for web page making, but its what I started with and so, until I have the engergy and time to spend 2 weeks making a new website, could a few users with MAC's, go to www.legacy-collectables.com and tell me if there are any differences in your ability to see other pages? I have been told that Mac users can not navigate through the site, and I have downloaded 2 web page makers and bought another and none of them can import the entire site, so its either not have Mac users see Legacy or I have to rebuild the site completely (its over 70+ pages of information)

Ed

FNorm · 09-27-2010, 07:05 AM

Ed,
I can see your 'Featured Item', and the appraisal blurb. Still can't get to your other pages.

Thanks for trying,

FN

sheepherder · 09-27-2010, 07:09 AM

Quote:

Originally Posted by Edward Tinker

Off the subject, but I know will be read by folks.

I upgraded to Microsoft Publisher 2010. I know some folks don't like it for web page making, but its what I started with and so, until I have the engergy and time to spend 2 weeks making a new website, could a few users with MAC's, go to www.legacy-collectables.com and tell me if there are any differences in your ability to see other pages? I have been told that Mac users can not navigate through the site, and I have downloaded 2 web page makers and bought another and none of them can import the entire site, so its either not have Mac users see Legacy or I have to rebuild the site completely (its over 70+ pages of information)

Ed

I don't have a MAC, but I use SeaMonkey for my web browsing (Mozilla by another name). The "Enter Here For Our Great Selection" button (if it is a button) does not work; on the "General Information" page there is a button or link on the left side with no graphic - it seems to be "Page1611.htm"...Clicking that box takes you to the "Fine Firearms In Stock" page which is also missing a graphic on the left - a "Page356.htm" box/button...The 12 buttons on the "Fine Firearms" page take a *long* time to load; no idea why...

Hope this is a small help.

(When the Mozilla people concentrated on FireFox, a small group continued development of a new Mozilla; SeaMonkey is their project)

Edward Tinker · 09-27-2010, 07:36 AM

Well, I have no idea, I will eventually get away from publisher, as I hoped html was html (I know that "their" version is frigged.

Fred, so, the other things don't show as "links" to click on?

I haven't tried recently, but firefox worked fine last time I tried....

Ed

Edward Tinker · 09-27-2010, 07:46 AM

ok, on this laptop (the "spare" I brought with me), I just downloaded the latest Mozilla / Firefox and it went to a page of legacy that said 20 Sept, i refreshed and it shows todays date of the 27th (my new files I uploaded this AM) and everything shows up, but the center link does not work.

All the links on the left work.

Again, I had to refresh that page because my history and temp files were imported.

But the main page of All guns came up, and then I chose the PPK html

Most everything is working for me.

If I had a couple six packs of wine coolers, I'd make a new site....

Well, I bought publisher hoping it would help, but primarily because it has a more robust book printing capability (saves in higher resolution)

Ed

mrerick · 09-27-2010, 10:28 AM

Hi Ed, using Firefox the navigation buttons in the Left frame don't show up on pages below your entry/home page.

MS uses too many Explorer specific "extensions".

Should you decide to re-construct the site manually, consider "Dreamweaver" which is part of the Adobe web oriented software suite. Your site could be done using Cascading Style Sheets (CSS).

It's much less labor intensive to implement a site using one of the Web 2.0 tools like the open source WordPress BLOG software. wordpress.org has the downloads. I run this software on a Linux server, and it's very compatible, extensible and reliable. You can also create a temporary Blog on their wordpress.com site if you want to test some ideas out.

Marc

Edward Tinker · 09-27-2010, 10:33 AM

Yes, I have dreamweaver trial downloaded

FNorm · 09-27-2010, 12:58 PM

Ed,

Yeah, the stuff on the left, buttons? don't show up as that at all. I use Safari as do most MACs

FN

09-27-2010, 03:09 AM	#24
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,966 Thanks: 2,066 Thanked 4,595 Times in 2,116 Posts	Off the subject, but I know will be read by folks. I upgraded to Microsoft Publisher 2010. I know some folks don't like it for web page making, but its what I started with and so, until I have the engergy and time to spend 2 weeks making a new website, could a few users with MAC's, go to www.legacy-collectables.com and tell me if there are any differences in your ability to see other pages? I have been told that Mac users can not navigate through the site, and I have downloaded 2 web page makers and bought another and none of them can import the entire site, so its either not have Mac users see Legacy or I have to rebuild the site completely (its over 70+ pages of information) Ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

09-27-2010, 07:36 AM	#27
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,966 Thanks: 2,066 Thanked 4,595 Times in 2,116 Posts	Well, I have no idea, I will eventually get away from publisher, as I hoped html was html (I know that "their" version is frigged. Fred, so, the other things don't show as "links" to click on? I haven't tried recently, but firefox worked fine last time I tried.... Ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

09-27-2010, 10:28 AM	#29
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,920 Thanks: 1,377 Thanked 3,135 Times in 1,518 Posts	Hi Ed, using Firefox the navigation buttons in the Left frame don't show up on pages below your entry/home page. MS uses too many Explorer specific "extensions". Should you decide to re-construct the site manually, consider "Dreamweaver" which is part of the Adobe web oriented software suite. Your site could be done using Cascading Style Sheets (CSS). It's much less labor intensive to implement a site using one of the Web 2.0 tools like the open source WordPress BLOG software. wordpress.org has the downloads. I run this software on a Linux server, and it's very compatible, extensible and reliable. You can also create a temporary Blog on their wordpress.com site if you want to test some ideas out. Marc __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.

09-08-2010, 10:56 PM	#21
Ardennes User Join Date: Jun 2010 Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	Jamese is correct. It's not difficult to figure out where the cries of "advertising" are coming from. This was a once-in-a-lifetime opportunity and I'm sure several people would like to have been chosen for the job. Legacy was chosen and has every right to be proud of that fact. No doubt other establishnents were in the running and several factors considered before the final decision was made. The folks at Legacy no doubt are ever grateful to all those who may have been influential in that decision.

09-12-2010, 10:23 AM	#22
John Van Sandt New User Join Date: Jul 2010 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	Ed, My jaw dropped and drool was prolific when I saw the pictures. Congrats on the assignment!!! I am new to this and just cannot believe the prices. I remember finding Lugers for $50 each when I was in college and could not afford a down payment on a free meal. One can only hope when some of these go up for sale they will be listed here I am still looking for a 9mm in good shape at a reasonable price 73 John

09-12-2010, 10:31 AM	#23
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,966 Thanks: 2,066 Thanked 4,595 Times in 2,116 Posts	John, lots of folks are putting in 'bids" for the inventory, as its being sold as an entire lot. Whoever gets them will have to sell them somewhere, at shows, on-line etc? I first started reading about lugers in the 70's as a teen, but my first bought luger was a reblued artillery for $350 in 1983 and then a few yrs later a mismatch for $350 (over paid on that one) Ed

09-27-2010, 07:05 AM	#25
FNorm Patron LugerForum Patron Join Date: Mar 2009 Location: Colorado Posts: 978 Thanks: 68 Thanked 127 Times in 108 Posts	Ed, I can see your 'Featured Item', and the appraisal blurb. Still can't get to your other pages. Thanks for trying, FN

09-27-2010, 07:46 AM	#28
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,966 Thanks: 2,066 Thanked 4,595 Times in 2,116 Posts	ok, on this laptop (the "spare" I brought with me), I just downloaded the latest Mozilla / Firefox and it went to a page of legacy that said 20 Sept, i refreshed and it shows todays date of the 27th (my new files I uploaded this AM) and everything shows up, but the center link does not work. All the links on the left work. Again, I had to refresh that page because my history and temp files were imported. But the main page of All guns came up, and then I chose the PPK html Most everything is working for me. If I had a couple six packs of wine coolers, I'd make a new site.... Well, I bought publisher hoping it would help, but primarily because it has a more robust book printing capability (saves in higher resolution) Ed

09-27-2010, 10:33 AM	#30
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,966 Thanks: 2,066 Thanked 4,595 Times in 2,116 Posts	Yes, I have dreamweaver trial downloaded

09-27-2010, 12:58 PM	#31
FNorm Patron LugerForum Patron Join Date: Mar 2009 Location: Colorado Posts: 978 Thanks: 68 Thanked 127 Times in 108 Posts	Ed, Yeah, the stuff on the left, buttons? don't show up as that at all. I use Safari as do most MACs FN