Is there a Broomhandle Doctor in the Haus? - Runs Good!

Lugerdoc · 03-18-2010, 10:08 AM

If your hammer is not cocking correctly on recoil, it may not be the sear arm (what you are calling the disconnector) that is at fault. It may be that your rocker plunger (part #11 in GPC exploded view) arm may be too short to activate the disconnector properly. It took me several days to find that this was the problem on a Red Nine that had this problem. TH PS: I do have most ORIGINAL broom parts in stock

03-18-2010, 10:08 AM	#10
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	If your hammer is not cocking correctly on recoil, it may not be the sear arm (what you are calling the disconnector) that is at fault. It may be that your rocker plunger (part #11 in GPC exploded view) arm may be too short to activate the disconnector properly. It took me several days to find that this was the problem on a Red Nine that had this problem. TH PS: I do have most ORIGINAL broom parts in stock __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net