LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > General Discussion Forums > Shooting and Reloading

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-12-2009, 09:31 PM   #6
saab-bob
User
 
saab-bob's Avatar
 
Join Date: Jul 2009
Location: So Cal
Posts: 459
Thanks: 774
Thanked 143 Times in 87 Posts
Default

Alvin

I also shoot my pre-war small ring commercial.I shoot PRIV or Fiocchi 30 Mauser.

A very important item with these guns,is that you need to replace all the the springs.
That dimple on the frame behind the bolt stop shows the recoil spring is weak.It is allowing the bolt to slam against the bolt stop to hard.If this continues the bolt stop will break and you will have the bolt bang your forehead. Very uncomfortable.
A weak magazine spring could also give feeding problems,as you describe.

You also need to check to make sure the correct firing pin is installed. You need the firing pin spring to be screwed on to the firing pin. Mine had a incorrect replacement firing pin where the spring was not attached.The loose firing pin spring and recoil spring interfered with each other causing a slam fire out of battery.Not good.

These are fun guns to shot,but all of them are at least 60 years old. So they need plenty of TLC.

Remember the 30 Mauser was the first magnum pistol cartridge of its day,so the standard loads are pretty hot.

Be careful out there!

Bob
__________________
"I think,therefore I own guns"
saab-bob is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:03 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2026, Lugerforum.com