Old Blue

newluger · 12-04-2009, 05:43 PM

Every said is absolutely correct. To remove the FP, you just need to turn the screw a quarter turn. The the pin and everything comes out. However, before reinstalling the pin, eyeball the plug with the screw end and note where the little tab is. Then eyeball the slot that the plug with the tab locks into. You don't need a lot of pressure, just enough to engage the tab in the slot. If you apply too much force with the screwdriber, you can push the plug too far in.

Don't ask how me I know.

newluger

12-04-2009, 05:43 PM	#8
newluger User Join Date: Aug 2009 Location: Franklin Tennessee Posts: 119 Thanks: 22 Thanked 10 Times in 7 Posts	Every said is absolutely correct. To remove the FP, you just need to turn the screw a quarter turn. The the pin and everything comes out. However, before reinstalling the pin, eyeball the plug with the screw end and note where the little tab is. Then eyeball the slot that the plug with the tab locks into. You don't need a lot of pressure, just enough to engage the tab in the slot. If you apply too much force with the screwdriber, you can push the plug too far in. Don't ask how me I know. newluger