US Test eagle value

smkummer · 10-26-2009, 07:49 AM

I am storing this gun for a friend. It is serial number 7057. All matching except the toggle with is number 77. The extract is now missing. We were shooting it singly with a broken extractor and now the remaining piece is gone. Also it has a small tapped hole drilled in the lower grip area. Other than the above I would rate this the original bluing to be 92 to 95%.Appears to be original wood/nickel magazine.

I believe he will sell it or trade as we are mainly shooters (Love Colts). Looking for a Bisley 38-40. I will let him know of the price that it may be worth and probably list it here. thanks ahead of time Mike

Edward Tinker · 10-26-2009, 10:06 AM

Hello, welcome to the forum.

I am away from my home right now (at work) so can't look and see if 7057 is within the Bannerman numbers (it is within the accepted "range" of Test Lugers.

Dwights' commericial database shows that it has a mismatched toggle?

That makes a difference in value; as does the missing extractor and hole in the frame.

I would say depending on how many other parts mismatch, at $1600-$2400; maybe more, maybe less.

I don't have a Biseley and just 2nd and 3rd gen Colt revolvers, but interested in it.

weimar_lugers@verizon.net

Ed

smkummer · 10-26-2009, 10:42 AM

Yes, mis-matched toggle.

Mike B · 10-26-2009, 11:17 AM

Ed & Mike,
7057 is on the Bannerman list.

Mike

Edward Tinker · 10-26-2009, 02:46 PM

.
.
.
.

So, how many emails have been sent so far with low ball offers?

smkummer · 10-26-2009, 07:18 PM

No one has sent offers as of yet. I contacted the owner and he does not need the cash now but he likes to shoot any guns he owns. I told him that even if we obtained either an original extractor or repro that it was probably not a good idea to shoot this gun. (We were shooting it single shot and it shoots a perfect point of aim). I wouldn't doubt that the previous owner may have tried loading 9mm into it and that may have been how the extractor broke trying to get a stuck 9mm out of it. I am a big contributor on coltforum.com. and if it were my gun I would want a final end user to own the gun and have it for his own collection. I have not read your rules but if he decides to sell we will list it on your classifieds. thanks Mike

drbuster · 10-26-2009, 08:26 PM

It's a shame that this relic of American history was subjected to the abuse it was designed for, but over 109 years after the fact! Those extractors are hard to find, luckily they weren't numbered parts.

10-26-2009, 07:49 AM	#1
smkummer New User Join Date: May 2005 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	US Test eagle value I am storing this gun for a friend. It is serial number 7057. All matching except the toggle with is number 77. The extract is now missing. We were shooting it singly with a broken extractor and now the remaining piece is gone. Also it has a small tapped hole drilled in the lower grip area. Other than the above I would rate this the original bluing to be 92 to 95%.Appears to be original wood/nickel magazine. I believe he will sell it or trade as we are mainly shooters (Love Colts). Looking for a Bisley 38-40. I will let him know of the price that it may be worth and probably list it here. thanks ahead of time Mike Attached Thumbnails

10-26-2009, 10:06 AM	#2
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,966 Thanks: 2,066 Thanked 4,595 Times in 2,116 Posts	Hello, welcome to the forum. I am away from my home right now (at work) so can't look and see if 7057 is within the Bannerman numbers (it is within the accepted "range" of Test Lugers. Dwights' commericial database shows that it has a mismatched toggle? That makes a difference in value; as does the missing extractor and hole in the frame. I would say depending on how many other parts mismatch, at $1600-$2400; maybe more, maybe less. I don't have a Biseley and just 2nd and 3rd gen Colt revolvers, but interested in it. weimar_lugers@verizon.net Ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

10-26-2009, 02:46 PM	#5
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,966 Thanks: 2,066 Thanked 4,595 Times in 2,116 Posts	. . . . So, how many emails have been sent so far with low ball offers? __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

10-26-2009, 10:42 AM	#3
smkummer New User Join Date: May 2005 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Yes, mis-matched toggle.

10-26-2009, 11:17 AM	#4
Mike B Lifer Lifetime Forum Patron Join Date: Apr 2005 Location: South Louisiana Posts: 979 Thanks: 1 Thanked 272 Times in 100 Posts	Ed & Mike, 7057 is on the Bannerman list. Mike

10-26-2009, 07:18 PM	#6
smkummer New User Join Date: May 2005 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	No one has sent offers as of yet. I contacted the owner and he does not need the cash now but he likes to shoot any guns he owns. I told him that even if we obtained either an original extractor or repro that it was probably not a good idea to shoot this gun. (We were shooting it single shot and it shoots a perfect point of aim). I wouldn't doubt that the previous owner may have tried loading 9mm into it and that may have been how the extractor broke trying to get a stuck 9mm out of it. I am a big contributor on coltforum.com. and if it were my gun I would want a final end user to own the gun and have it for his own collection. I have not read your rules but if he decides to sell we will list it on your classifieds. thanks Mike

10-26-2009, 08:26 PM	#7
drbuster User Join Date: Jun 2002 Location: San Mateo, California Posts: 1,432 Thanks: 2 Thanked 71 Times in 56 Posts	It's a shame that this relic of American history was subjected to the abuse it was designed for, but over 109 years after the fact! Those extractors are hard to find, luckily they weren't numbered parts.