1917 DWM Luger with a bent frame

G.T. · 11-22-2008, 10:10 PM

Hi Ed, this has a very simple solution... I've removed a ton of dents,..and here is what i would do... place either side on solid plates or blocks of aluminum.. sandwich the frame between another block or plate of aluminum, and beat the **** out of it... it will let go with no damage to anything... you just have to upset the dent to remove the receiver... a thousands or two will set you free... best to you...til...lat'r...GT

11-22-2008, 10:10 PM	#14
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,528 Thanks: 1,334 Thanked 3,711 Times in 1,014 Posts	easy solution... Hi Ed, this has a very simple solution... I've removed a ton of dents,..and here is what i would do... place either side on solid plates or blocks of aluminum.. sandwich the frame between another block or plate of aluminum, and beat the **** out of it... it will let go with no damage to anything... you just have to upset the dent to remove the receiver... a thousands or two will set you free... best to you...til...lat'r...GT