Troubleshooting my troubled shooter...

Lugerdoc · 04-07-2008, 11:01 AM

Gewehr, I do carry the 36# Wolff recoil springs which might help if your current spring is too strong and now allowing the toggle to fully open (not picking up round from the mag), but since your toggle is not closing all the way when it does pick up a round, you may need their +10% stronger one. Also since your barrel has been changed, I would suggest checking the head spacing, polishing the feed ramps and checking that the toggle assy is moving freely in the barrelled receiver (yours may have been "squeezed" during rebarreling). I can do this work if you don't feel qualified. Lugerdoc

04-07-2008, 11:01 AM	#6
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Gewehr, I do carry the 36# Wolff recoil springs which might help if your current spring is too strong and now allowing the toggle to fully open (not picking up round from the mag), but since your toggle is not closing all the way when it does pick up a round, you may need their +10% stronger one. Also since your barrel has been changed, I would suggest checking the head spacing, polishing the feed ramps and checking that the toggle assy is moving freely in the barrelled receiver (yours may have been "squeezed" during rebarreling). I can do this work if you don't feel qualified. Lugerdoc __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net