Navy Luger on AuctionArms

lugerholsterrepair · 03-28-2008, 04:57 PM

As Tom says this is an interesting holster from a maker mark standpoint.
It does however have pretty serious issues.

The tool pouch is missing.

The ears are missing on the rod sleeve top.

The stock block has been removed and a belt loop replaces it.

The pull-up strap is gone.

And what might be the most serious is what appears to be a missing chunk of the edge of the barrel sleeve where it has come apart. This would be a disaster because it cannot be repaired....I would want to ask Sonar if this is indeed the case as it would deffinately affect my bid.

Jerry Burney

03-28-2008, 04:57 PM	#8
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,133 Times in 1,439 Posts	As Tom says this is an interesting holster from a maker mark standpoint. It does however have pretty serious issues. The tool pouch is missing. The ears are missing on the rod sleeve top. The stock block has been removed and a belt loop replaces it. The pull-up strap is gone. And what might be the most serious is what appears to be a missing chunk of the edge of the barrel sleeve where it has come apart. This would be a disaster because it cannot be repaired....I would want to ask Sonar if this is indeed the case as it would deffinately affect my bid. Jerry Burney __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."