Looking to buy my first Luger....

nero63 · 11-23-2007, 08:12 AM

I'm planning on buying my first Luger after Christmas and I'd appreciate some input/advice. I'd prefer to buy a post WW2/newer one, and I'm considering buying a NIB/LNIB 9mm Interarms Mauser or a current production(?) stainless steel one from Orimar. Of the two, which would you'll consider more reliable and better built?

Aesthetically, I'd prefer one without the grip safety, and I've also read that the grip safety Lugers are not as comfortable to shoot, is this correct, and are they uncomfortable to shoot? However on the other hand, I'm also concerned that the stainless Lugers may not be of the same quality as the Interarms/Mauser Luger, and that I may have more difficulty seeing the stainless sights (w/my middle-aged eyes) in some light settings compared to the blued sights of the other, are these concerns valid? Of the two which would you'll recommend?

Finally, can someone provide me with a link or contact info for Orimar, and an idea of how much they are asking for their stainless Lugers?

Thanks.

nero63

Hugh · 11-23-2007, 09:18 AM

For what you will pay for a new Interarms Mauser, which I would prefer over the SS one, you can buy a nice original "shooter" Luger.

Pete Ebbink · 11-23-2007, 11:56 AM

Dealer info...if you go that route...

http://forum.lugerforum.com/showthre...highlight=Poll

thegundude · 11-23-2007, 04:21 PM

IMHO, you can find a "real" shooter grade Luger for less money that will not only work better (usually) but will have a better fit and finish.

Did I mention you can get one for less money?

LugerVern · 11-25-2007, 10:08 AM

We have a Classified Add section (WTB) here on the forum, and I would like to recommend you use it to get your first luger. Many others have done the same with good results and for the most part you will get a fair deal and a reliable gun that doesnÃ¢??t need too much tweaking.

Getting your first luger is a big step and is always mixed with thoughts of shooting and making a good investment, not an easy decision Ã¢??good luck

Vern

nero63 · 11-26-2007, 02:07 AM

Thanks to all for the helpful/informative replies.

I'm looking for a reliable shooter with a good finish and grips, rather than a collector Luger. My budget (after the holidays) for the Luger will be approximately $1500. I'm not concerned if the numbers match or not, or even if it's been refinished. I just want a 9mm Luger that will function reliably with factory FMJ ammo, has a good rust/pitting free bore, and that looks nice. I like the idea of being able to get a NIB/LNIB Interarms Mauser within my budget, but aesthetically I don't really like the straight front grip and grip safety on them. When ready to purchase, I'll keep my eye on this forum's classified section, GB, AA, GA, as well as some of the dealers listed on Pete's link.

Again, thanks.

Jerry

11-23-2007, 08:12 AM	#1
nero63 New User Join Date: Sep 2006 Location: Tampa Bay Area Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Looking to buy my first Luger.... I'm planning on buying my first Luger after Christmas and I'd appreciate some input/advice. I'd prefer to buy a post WW2/newer one, and I'm considering buying a NIB/LNIB 9mm Interarms Mauser or a current production(?) stainless steel one from Orimar. Of the two, which would you'll consider more reliable and better built? Aesthetically, I'd prefer one without the grip safety, and I've also read that the grip safety Lugers are not as comfortable to shoot, is this correct, and are they uncomfortable to shoot? However on the other hand, I'm also concerned that the stainless Lugers may not be of the same quality as the Interarms/Mauser Luger, and that I may have more difficulty seeing the stainless sights (w/my middle-aged eyes) in some light settings compared to the blued sights of the other, are these concerns valid? Of the two which would you'll recommend? Finally, can someone provide me with a link or contact info for Orimar, and an idea of how much they are asking for their stainless Lugers? Thanks. nero63

11-23-2007, 09:18 AM	#2
Hugh RIP Join Date: Jun 2002 Location: Southeast Texas Swamp Posts: 2,460 Thanks: 2 Thanked 166 Times in 65 Posts	For what you will pay for a new Interarms Mauser, which I would prefer over the SS one, you can buy a nice original "shooter" Luger. __________________ *TRUMP FOR PREZ IN '20!*

11-23-2007, 04:21 PM	#4
thegundude User Join Date: Jan 2005 Location: Western NC Posts: 1,137 Thanks: 3 Thanked 16 Times in 3 Posts	IMHO, you can find a "real" shooter grade Luger for less money that will not only work better (usually) but will have a better fit and finish. Did I mention you can get one for less money? __________________ Keep your knees in the breeze and your iron in the air. ~Steve

11-23-2007, 11:56 AM	#3
Pete Ebbink User Join Date: Jun 2002 Location: The USA Posts: 5,919 Thanks: 0 Thanked 6 Times in 4 Posts	Dealer info...if you go that route... http://forum.lugerforum.com/showthre...highlight=Poll

11-25-2007, 10:08 AM	#5
LugerVern User Join Date: Apr 2005 Location: Virginia Posts: 563 Thanks: 1 Thanked 34 Times in 27 Posts	We have a Classified Add section (WTB) here on the forum, and I would like to recommend you use it to get your first luger. Many others have done the same with good results and for the most part you will get a fair deal and a reliable gun that doesnÃ¢??t need too much tweaking. Getting your first luger is a big step and is always mixed with thoughts of shooting and making a good investment, not an easy decision Ã¢??good luck Vern

11-26-2007, 02:07 AM	#6
nero63 New User Join Date: Sep 2006 Location: Tampa Bay Area Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks to all for the helpful/informative replies. I'm looking for a reliable shooter with a good finish and grips, rather than a collector Luger. My budget (after the holidays) for the Luger will be approximately $1500. I'm not concerned if the numbers match or not, or even if it's been refinished. I just want a 9mm Luger that will function reliably with factory FMJ ammo, has a good rust/pitting free bore, and that looks nice. I like the idea of being able to get a NIB/LNIB Interarms Mauser within my budget, but aesthetically I don't really like the straight front grip and grip safety on them. When ready to purchase, I'll keep my eye on this forum's classified section, GB, AA, GA, as well as some of the dealers listed on Pete's link. Again, thanks. Jerry