unit marking on a 1921 dwm

[el_loco]

hi,

every part has its 2digit s/n-stamp, how its known from the military lugers.
the sideplate has also (additional to its military stamp) a "24"-stamp on its underside, were the commercial were stamped
the hold-open has none s/n, it seems to be replaced.

the barrel is stamped with the hole s/n "87424" and the diameter "8,84".
at top (about 1 o'clock) eagle as proof-stamp (the same how its seen on the receiver).
no crown/n stamp to find.

Also, it looks like the serial number on the left breechblock may overstamp another figure.

no, its the bad pic

the sideplate inside and the center toggle on its underside are stamped with "874" - the first 3 digits of the s/n.

if i compare the stamp-size with other lugers, the stamps on the sear bar, the trigger, the sideplate (military-style) seem to be a number too big.
they all are clear and do not look overstamped.

regards
klaus