Range Day - Happy then Disappointed

Vlim · 09-23-2007, 06:37 AM

Hi,

The most important trick is to make sure the connecting link (S-shaped 'hook' on rear toggle) hooks up to the main spring. In order to do this, the link must point backwards when sliding the upper onto the frame (best done upside down). When the link has cleared the magazine well, turn them upside down again and the link will fall in the gap where the main spring hook resides, hooking behind it.

09-23-2007, 06:37 AM	#2
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,991 Times in 1,205 Posts	Hi, The most important trick is to make sure the connecting link (S-shaped 'hook' on rear toggle) hooks up to the main spring. In order to do this, the link must point backwards when sliding the upper onto the frame (best done upside down). When the link has cleared the magazine well, turn them upside down again and the link will fall in the gap where the main spring hook resides, hooking behind it.