Walther

09-21-2001, 10:00 AM

Do we have any Walther people part of the Luger forum? I had a Walther PP brought to me by an eldery gentleman in a plastic bag in pieces. Got it back together until I got to the hammer block. It is like nothing I've seen beore. It does not have a place machined for a hammed block spring and pin. The hammer block has a slot machined on the side for what I presume is a spring retension of some kind. Of course there was not anything resembling this in the group of parts.

Anybody familar with the earlier Walthers that would have a break down of this and possibly a needed part?

Thanks.

Neil

John Sabato · 09-21-2001, 10:14 AM

with a domain name yet...

you can reach it at this URL:

http://boards.rennlist.com/cgi-bin/pp-k/pp-k.pl?

http://boards.rennlist.com/cgi-bin/pp-k/pp-k.pl?

09-21-2001, 08:09 PM

Sounds like you have an early PP that uses a C-shaped spring to operate the hammer block. I have a PPK like that in the 766,xxx range. Can you give the serial range for yours? Also does the hammer have the groove for the loaded chamber indicator? One or two piece firing pin?

09-21-2001, 09:32 PM

The Walther has a one pc firing pin and is in the 706XXX range. It sounds as if the C spring you mentioned would be the pc that is missing. Any idea where I could find one?

Thanks,

Neil

09-21-2001, 10:59 PM

Neil, I'm framiliar with the spring that you need, but originals are just not available. If need be I can make you one. Let me know. Tom

Marvin · 09-22-2001, 05:35 AM

Neil,

I have an early PP where the "C" spring was missing and I bought mine from Tom, and it works!

One thing I would like to mention. I took my pistol to a local gunsmith and a copy of the information about the "C" spring and he said it was not correct! Anyway, be careful if you have anyone look at it and unless they know about this spring they will be confused. It soulds like you have the ability to install it yourself; it is not difficult.

Marvin

09-27-2001, 11:28 AM

There's a nice Walther Forum at

http://www.carl-walther.de/

Uncle Mike · 09-27-2001, 08:24 PM

Hi John,I'm sorry to say the pp-ppk site is not beig used.I hope it will come back,MC :-(

Dok · 09-27-2001, 09:22 PM

Well it's still there, but any forum needs participation...

09-21-2001, 10:00 AM	#1
N Keller Guest Posts: n/a	Walther Do we have any Walther people part of the Luger forum? I had a Walther PP brought to me by an eldery gentleman in a plastic bag in pieces. Got it back together until I got to the hammer block. It is like nothing I've seen beore. It does not have a place machined for a hammed block spring and pin. The hammer block has a slot machined on the side for what I presume is a spring retension of some kind. Of course there was not anything resembling this in the group of parts. Anybody familar with the earlier Walthers that would have a break down of this and possibly a needed part? Thanks. Neil

09-21-2001, 10:14 AM	#2
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,308 Times in 1,098 Posts	There is a PP-PPK forum, but it has not been formalized with a domain name yet... you can reach it at this URL: http://boards.rennlist.com/cgi-bin/pp-k/pp-k.pl? http://boards.rennlist.com/cgi-bin/pp-k/pp-k.pl?

09-21-2001, 08:09 PM	#3
dobk Guest Posts: n/a	Re: Walther Sounds like you have an early PP that uses a C-shaped spring to operate the hammer block. I have a PPK like that in the 766,xxx range. Can you give the serial range for yours? Also does the hammer have the groove for the loaded chamber indicator? One or two piece firing pin?

09-21-2001, 09:32 PM	#4
N Keller Guest Posts: n/a	Re: Walther The Walther has a one pc firing pin and is in the 706XXX range. It sounds as if the C spring you mentioned would be the pc that is missing. Any idea where I could find one? Thanks, Neil

09-21-2001, 10:59 PM	#5
tom h Guest Posts: n/a	Re: Walther PP Spring Neil, I'm framiliar with the spring that you need, but originals are just not available. If need be I can make you one. Let me know. Tom

09-22-2001, 05:35 AM	#6
Marvin User Join Date: Jun 2002 Location: Upstate S.C. Posts: 1,132 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Walther Neil, I have an early PP where the "C" spring was missing and I bought mine from Tom, and it works! One thing I would like to mention. I took my pistol to a local gunsmith and a copy of the information about the "C" spring and he said it was not correct! Anyway, be careful if you have anyone look at it and unless they know about this spring they will be confused. It soulds like you have the ability to install it yourself; it is not difficult. Marvin

09-27-2001, 11:28 AM	#7
RenÃ?Â© Guest Posts: n/a	Re: Walther There's a nice Walther Forum at http://www.carl-walther.de/

09-27-2001, 08:24 PM	#8
Uncle Mike User Join Date: Dec 2002 Posts: 53 Thanks: 0 Thanked 0 Times in 0 Posts	Re: There is a PP-PPK forum, but it has not been formalized Hi John,I'm sorry to say the pp-ppk site is not beig used.I hope it will come back,MC :-(

09-27-2001, 09:22 PM	#9
Dok RIP Join Date: Jun 2002 Location: Bermuda (Eat Your Heart Out) Posts: 1,626 Thanks: 0 Thanked 3 Times in 3 Posts	Re: There is a PP-PPK forum, but it has not been formalized Well it's still there, but any forum needs participation...