1937 s/42

crc · 03-06-2007, 12:13 AM

Is it typical for the thumb safety lever, trigger, magazine lever and grip screws to be a darker, shinner blue finish than the rest of the pistol? Thank you. Randy

crc · 03-06-2007, 07:39 PM

Must have been a stupid question

minigun · 03-06-2007, 08:43 PM

No, not a stupid question, probably the ones that have seen this post don't know. I'm not an expert either, but I have had an S/42 '37 non-strawed parts Luger before.

It seems that I recall that my grip screws weren't any darker than the rest of the bluing. The trigger and mag ejector button (right side) did seem to have a darker sheen to it.

Hope this helps.

G.T. · 03-06-2007, 09:43 PM

Hi Randy and all, The different parts usually show a different depth and shade of color for several reasons... most notibly.. the direction of the polishing marks with metal prep... The different grits and polishes in each area where the parts are made... the different metal type and hardness, or lack of... The type of part & wear, as in a protected part, or an exposted part... also the amount of finish that leaches out over time on a receiver, versus a bright blue barrel... I usuall look for difference in these areas, and if possible in outdoor sunlight... I find most of the honest pistols show quite a bit of difference in their individual part color... I have always noticed the flat side of the mag release is always darker then the surrounding frame area.. and as I said earlier..barrels are most often darker then the receiver... grip screws, shinny and dark... unless they have seen a bit of use... then lighter, duller... If you see a real crisp "byf" it's every bit as pretty as a earlier S/42... just more finish marks where they didn't go to the next level of polish... still real pretty when bright blue is still present... Best to all, til...lat'r....GT

03-06-2007, 12:13 AM	#1
crc User Join Date: Nov 2003 Location: colorado Posts: 66 Thanks: 6 Thanked 2 Times in 2 Posts	1937 s/42 Is it typical for the thumb safety lever, trigger, magazine lever and grip screws to be a darker, shinner blue finish than the rest of the pistol? Thank you. Randy

03-06-2007, 09:43 PM	#4
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,528 Thanks: 1,334 Thanked 3,711 Times in 1,014 Posts	Shades blue!! Hi Randy and all, The different parts usually show a different depth and shade of color for several reasons... most notibly.. the direction of the polishing marks with metal prep... The different grits and polishes in each area where the parts are made... the different metal type and hardness, or lack of... The type of part & wear, as in a protected part, or an exposted part... also the amount of finish that leaches out over time on a receiver, versus a bright blue barrel... I usuall look for difference in these areas, and if possible in outdoor sunlight... I find most of the honest pistols show quite a bit of difference in their individual part color... I have always noticed the flat side of the mag release is always darker then the surrounding frame area.. and as I said earlier..barrels are most often darker then the receiver... grip screws, shinny and dark... unless they have seen a bit of use... then lighter, duller... If you see a real crisp "byf" it's every bit as pretty as a earlier S/42... just more finish marks where they didn't go to the next level of polish... still real pretty when bright blue is still present... Best to all, til...lat'r....GT

03-06-2007, 07:39 PM	#2
crc User Join Date: Nov 2003 Location: colorado Posts: 66 Thanks: 6 Thanked 2 Times in 2 Posts	Must have been a stupid question

03-06-2007, 08:43 PM	#3
minigun User Join Date: Nov 2002 Location: Texas Posts: 424 Thanks: 16 Thanked 20 Times in 15 Posts	No, not a stupid question, probably the ones that have seen this post don't know. I'm not an expert either, but I have had an S/42 '37 non-strawed parts Luger before. It seems that I recall that my grip screws weren't any darker than the rest of the bluing. The trigger and mag ejector button (right side) did seem to have a darker sheen to it. Hope this helps.