LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > Luger Discussion Forums > Early Lugers (1900-1906)

Reply
Thread Tools Display Modes
Unread 01-24-2007, 09:41 AM   #21
pepe
User
 
Join Date: Dec 2006
Location: portugal
Posts: 37
Thanks: 5
Thanked 1 Time in 1 Post
Default

ADMIN:Picture large enough to make your eyes bleed (please post here as suggested )
http://img120.imageshack.us/img120/6743/dsc011863ur.jpg


pepe is offline   Reply With Quote
Unread 01-24-2007, 03:35 PM   #22
pepe
User
 
Join Date: Dec 2006
Location: portugal
Posts: 37
Thanks: 5
Thanked 1 Time in 1 Post
Default

Vern,

I've measured the muzzle and I am sure it is a 9 mm and the visible part of the barrel is 10 mm. That's why I thouth it was a navy.
So, I'm expecting your final veridict!!
Regards, Pepe
pepe is offline   Reply With Quote
Unread 01-24-2007, 03:40 PM   #23
pepe
User
 
Join Date: Dec 2006
Location: portugal
Posts: 37
Thanks: 5
Thanked 1 Time in 1 Post
Default

Dave,
It was my girl friend, Fernanda, who took the pictures!! The camera is a Sony Carl Zeiss, Vario-Tessar, 7,2 Mega pixels. She's telling me that she can sell it...
pepe is offline   Reply With Quote
Unread 01-24-2007, 10:00 PM   #24
LugerVern
User
 
LugerVern's Avatar
 
Join Date: Apr 2005
Location: Virginia
Posts: 563
Thanks: 1
Thanked 34 Times in 27 Posts
Default

Pepe

I am running out of things to tell you about your gun; your barrel length is 120mm, there is about 20mm hidden, your gun has some number 8 worker marks that you find on some early Manuel II Army guns. Several examples of the Army gun have been found with the crest removed thought to have been done in 1910 when the Republic of Portugal was formed.

Your barrel caliber is a mystery in your configuration, some 9mm Army guns have been reported with 4 inch barrels but yours is longer than this.

We could try and determine if your barrel has been replaced by looking at the alignment mark on the bottom of the upper receiver, this is controversial as a good gun smith might make a perfect fit. It would give us a chance to see if the serial number has in fact been removed or if a replacement barrel attached. You would have to take another picture.

By the way I have the same camera, very nice close up feature.

That is the best I can do

I still think Army M2 with crest removed in 1910

Vern
LugerVern is offline   Reply With Quote
Unread 01-27-2007, 10:07 AM   #25
pepe
User
 
Join Date: Dec 2006
Location: portugal
Posts: 37
Thanks: 5
Thanked 1 Time in 1 Post
Default

hi everyone,
here you have pictures from the barrel


pepe is offline   Reply With Quote
Unread 01-28-2007, 06:49 PM   #26
LugerVern
User
 
LugerVern's Avatar
 
Join Date: Apr 2005
Location: Virginia
Posts: 563
Thanks: 1
Thanked 34 Times in 27 Posts
Default

Hello Pepe

Your barrel alignment marks are so close I would not want to say one way or the other that your barrel has been replaced or not. (especially using a picture). I made a small side by side comparison to show you why this can be so controversial a method of determination.

I did see something of interest in the one picture, when enhanced it seems to show the number 5 and maybe the number 7 to the left, could this be a 75?

Please look very closely using a powerful glass and let us know if there is something there or just a reflection. That camera you have has the ability to do this for you.

I know I have asked you before but, if that is a number at the very base of your barrel I need you to have the caliber verified, itâ??s important.

Vern
LugerVern is offline   Reply With Quote
Unread 01-31-2007, 02:12 PM   #27
pepe
User
 
Join Date: Dec 2006
Location: portugal
Posts: 37
Thanks: 5
Thanked 1 Time in 1 Post
Default

Hi Vern

I coudn't find any more marks
Maybe you are right and the caliber is 7.65.Can you check with these photos?and can you please guive me, any information about the cartridges ?
thanks Pepe


pepe is offline   Reply With Quote
Unread 01-31-2007, 03:18 PM   #28
wlyon
Lifer 2X
Lifetime Forum
Patron
 
wlyon's Avatar
 
Join Date: May 2005
Location: Somewhere in Montana
Posts: 2,619
Thanks: 3,144
Thanked 2,530 Times in 943 Posts
Default

Pepe A good way to tell between 9mm and 30 is with a regular lead pencil with an eraser. If the eraser end fits in the barrel it's a 9mm if not its a 30 cal. Bill
__________________
Bill Lyon
wlyon is offline   Reply With Quote
Unread 01-31-2007, 09:49 PM   #29
LugerVern
User
 
LugerVern's Avatar
 
Join Date: Apr 2005
Location: Virginia
Posts: 563
Thanks: 1
Thanked 34 Times in 27 Posts
Default

Pepe

You might want to take Bill Wlyonâ??s advice, from your picture it looks like your bore is less than 8 mm and that would make it a 7.65 caliber.

I am going to default back to the other collectors on the cartridge stampings, way out of my knowledge area; the only one I might know is the DWM K and this is a guess.

DWM K = Deutsche Waffen u. Munitionsfabriken, Karlsruhe, Germany

Thank you for letting us analyze your gun, its fun to do research, donâ??t be a stranger on the forum we can always use a perspective from your area of the world.
If you still live in Portugal or have contacts there I would love to make contact with the Lisbon Maritime Museum and ask them some questions on Navy Lugers. There is much research yet to be done.
You can email me directly with any information: vern_t_2000@yahoo.com

thank you

Vern
LugerVern is offline   Reply With Quote
Unread 01-31-2007, 10:12 PM   #30
wlyon
Lifer 2X
Lifetime Forum
Patron
 
wlyon's Avatar
 
Join Date: May 2005
Location: Somewhere in Montana
Posts: 2,619
Thanks: 3,144
Thanked 2,530 Times in 943 Posts
Default

Pepe Vern is correct on the DWM. I can't read the other 2 . Maybe a clear closeup or just define what it says. Bill
__________________
Bill Lyon
wlyon is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:31 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Lugerforum.com