Grip Screws

Hugh · 11-27-2006, 10:21 AM

Curt,

Drop a little WD40 or Liquid Wrench on the threads from inside and let them soak for a few hours. Place a screwdriver that fits the slots into the slots and tap the top if the screwdriver handle a few times to help loosen the threads, then try to unscrew using downward pressure on the screwdriver to keep the blade from jumping out of the slot. It is imperitive that you use a screwdriver with parallel sides to the blade (a gunsmith screwdriver) and not the common household type with the tapered blade.

11-27-2006, 10:21 AM	#3
Hugh RIP Join Date: Jun 2002 Location: Southeast Texas Swamp Posts: 2,460 Thanks: 2 Thanked 166 Times in 65 Posts	Curt, Drop a little WD40 or Liquid Wrench on the threads from inside and let them soak for a few hours. Place a screwdriver that fits the slots into the slots and tap the top if the screwdriver handle a few times to help loosen the threads, then try to unscrew using downward pressure on the screwdriver to keep the blade from jumping out of the slot. It is imperitive that you use a screwdriver with parallel sides to the blade (a gunsmith screwdriver) and not the common household type with the tapered blade. __________________ *TRUMP FOR PREZ IN '20!*