![]() |
my profile |
register |
faq |
search upload photo | donate | calendar |
|
|
#6 |
|
User
Join Date: Oct 2005
Location: Canton Bern
Posts: 68
Thanks: 0
Thanked 0 Times in 0 Posts
|
Sooo, I gave the old girl a good scrubbing, took out a good lump of gunk out from around and under the extractor (the spring was encased in dirt), cleaned and oiled all parts that needed it.
I got two new mec-gar mags and newly fitted Nills on the grip and headed for the range once again with 100 rds (50 115gr S&B and 50 124gr Subsonic S&B). Subsonic works fine with one round in 5 being extracted half way out of the chamber before the extractor jumped the rim. This left me with a jam since the bolt is trying to feed the next round in. Standard 115gr I have a 1 in 5 chance of a stovepipe. The additional problem both have in common is feeding a round in and it gets wedged half in the chamber at an angle though this was only a 1 in 10 occurrence. All in all neither ammo offers 100% reliability yet ![]() Suggestions most welcome. p.s I am also learning to grip with a stiff grip since this also helps things. I am a rifle shooter by preference so it is a new experience. |
|
|
|
|
|