What is correct loading tool for 1938 S/42?

Mike78 · 06-14-2006, 01:24 AM

How can I tell if I have the correct loading tool for a 1938 S/42 Luger? Also, what is the correct magazine type for this gun?

Mike

Frank · 06-14-2006, 04:53 PM

Hello again, Mike! The loading tool supplied with a 1938 Luger would have a stick winged eagle-over-63, abbreviated SE/63. There were two sizes of SE/63 marks used on loading tools. The small SE/63 would be used on mid to late 1937, all 1938 and a few early 1939 Lugers. The large SE/63 would be used on the remainder of the 1939 Lugers before the Germans changed the Inspection Office (Waffenamt) Code to SE/655.

The magazine should be a folded sheet metal blue body with an aluminum bottom. The markings on the aluminum bottom would include the serial number, including the letter suffix, a "+" sign, if it were a spare magazine and the Waffenamt (WaA) Mark. The WaA Mark would depend on the serial number of the pistol. If the suffix letter is "a" through "f", the WaA should be SE/63. If the suffix is a "g" then it could be SE/63 or SE/83. Beyong the "g" suffix, the WaA should be SE/83.

Hope this helps!!

Mike78 · 06-14-2006, 09:05 PM

Thank you Frank for answering both questions.

Mike

Lugerdoc · 06-15-2006, 07:21 AM

Mike, I have a correct tool & mag for your 1938, if needed. Sent details in a PM. TH

06-14-2006, 01:24 AM	#1
Mike78 User Join Date: Jun 2006 Posts: 35 Thanks: 0 Thanked 0 Times in 0 Posts	What is correct loading tool for 1938 S/42? How can I tell if I have the correct loading tool for a 1938 S/42 Luger? Also, what is the correct magazine type for this gun? Mike

06-15-2006, 07:21 AM	#4
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Mike, I have a correct tool & mag for your 1938, if needed. Sent details in a PM. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

06-14-2006, 04:53 PM	#2
Frank RIP Patron LugerForum Patron Join Date: Jun 2002 Location: Hot & Dry PHX, AZ Posts: 2,078 Thanks: 24 Thanked 164 Times in 87 Posts	Hello again, Mike! The loading tool supplied with a 1938 Luger would have a stick winged eagle-over-63, abbreviated SE/63. There were two sizes of SE/63 marks used on loading tools. The small SE/63 would be used on mid to late 1937, all 1938 and a few early 1939 Lugers. The large SE/63 would be used on the remainder of the 1939 Lugers before the Germans changed the Inspection Office (Waffenamt) Code to SE/655. The magazine should be a folded sheet metal blue body with an aluminum bottom. The markings on the aluminum bottom would include the serial number, including the letter suffix, a "+" sign, if it were a spare magazine and the Waffenamt (WaA) Mark. The WaA Mark would depend on the serial number of the pistol. If the suffix letter is "a" through "f", the WaA should be SE/63. If the suffix is a "g" then it could be SE/63 or SE/83. Beyong the "g" suffix, the WaA should be SE/83. Hope this helps!!

06-14-2006, 09:05 PM	#3
Mike78 User Join Date: Jun 2006 Posts: 35 Thanks: 0 Thanked 0 Times in 0 Posts	Thank you Frank for answering both questions. Mike