parts

equinehat · 01-17-2006, 09:25 PM

I stumbled across this site, and will give it a try, I am looking for a hold open latch spring.
Also need a locking bolt spring.
I have a question, the hold open latch, were they always marked with the last two numbers from the serial no?
I have a 37 luger that is all matching excpt for the hold open latch.
It looks like it is original to the gun.
If any one knows of where to buy parts on line. Thanks in advance

Luke · 01-17-2006, 09:39 PM

Try "Lugerdoc" (Tom Heller) on the forum.

He will probably need to know more about your gun. Mauser, DWM, Erfurt, ...etc. Year?

Good luck.
Luke

Edward Tinker · 01-17-2006, 10:18 PM

Joe, if you own a luger, then you should check us out

Welcome to the forum, lots of information here to browse through.

ed

Lugerdoc · 01-18-2006, 08:52 AM

Joe et al, I do have new DDR made PO8 HO springs $25 and TD lever spring @$15 available, as well as some original HOs with spring installed @$50. Most commerical lugers came with unnumbered HOs, safety levers & bars but these parts were required to be numbered by the military. contact hellerarms@webtv.net

equinehat · 01-18-2006, 08:54 AM

I have looked on the net and it is hard to find parts, I dont mind a sping made new for the hold open latch, and I dont mind a sping new made for the take down leaver. I just was wondering if the hold open latch was original to the gun being it is not numbered.

01-17-2006, 09:25 PM	#1
equinehat Banned Join Date: Jan 2006 Location: kansas Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts	looking for some small parts I stumbled across this site, and will give it a try, I am looking for a hold open latch spring. Also need a locking bolt spring. I have a question, the hold open latch, were they always marked with the last two numbers from the serial no? I have a 37 luger that is all matching excpt for the hold open latch. It looks like it is original to the gun. If any one knows of where to buy parts on line. Thanks in advance

01-17-2006, 09:39 PM	#2
Luke User Join Date: Jun 2002 Location: NC - USA Posts: 1,239 Thanks: 0 Thanked 19 Times in 7 Posts	Try "Lugerdoc" (Tom Heller) on the forum. He will probably need to know more about your gun. Mauser, DWM, Erfurt, ...etc. Year? Good luck. Luke __________________ "Peace, if possible; truth, at any cost." . . . Martin Luther

01-17-2006, 10:18 PM	#3
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,960 Thanks: 2,062 Thanked 4,591 Times in 2,114 Posts	Joe, if you own a luger, then you should check us out Welcome to the forum, lots of information here to browse through. ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

01-18-2006, 08:52 AM	#4
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Joe et al, I do have new DDR made PO8 HO springs $25 and TD lever spring @$15 available, as well as some original HOs with spring installed @$50. Most commerical lugers came with unnumbered HOs, safety levers & bars but these parts were required to be numbered by the military. contact hellerarms@webtv.net __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

01-18-2006, 08:54 AM	#5
equinehat Banned Join Date: Jan 2006 Location: kansas Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts	thanks I have looked on the net and it is hard to find parts, I dont mind a sping made new for the hold open latch, and I dont mind a sping new made for the take down leaver. I just was wondering if the hold open latch was original to the gun being it is not numbered.