Repro Stock

George Anderson · 03-08-2005, 04:48 PM

You will probably have to do some grinding on the stock iron or the lug (if you so choose). The last Sarco stock I bought was made of maple so that is not correct but they are cheap.

If you want a stock for shooting buy a Sarco job and fit it to your pistol. If you want a stock for shooting that will appreciate, buy an original or a Finn. The latter will cost you one to three hundred dollars more but you can recover your investment.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

03-08-2005, 04:48 PM	#2
George Anderson Lifer Lifetime Forum Patron Join Date: Jul 2002 Location: VA Posts: 3,592 Thanks: 1,773 Thanked 2,531 Times in 788 Posts	You will probably have to do some grinding on the stock iron or the lug (if you so choose). The last Sarco stock I bought was made of maple so that is not correct but they are cheap. If you want a stock for shooting buy a Sarco job and fit it to your pistol. If you want a stock for shooting that will appreciate, buy an original or a Finn. The latter will cost you one to three hundred dollars more but you can recover your investment.