Need help...30 Luger Reload recipes

Ron Smith · 04-10-2004, 06:12 PM

I use 5-5.2 grains of Unique. With the 100 GR Hornady XTP HP .312 bullet. It's made for 32-20. Start off at 4.5 GR and work up. The pressures are higher because of the tighter fit of the bullet. Guns cycled perfectly. Check for pressure signs as you do so. Slug your bore and get an accurate diameter. If it's .310 or above? You'er fine. If it's less. Use another bullet. I've used this load in a .309 bore, without any problem. I don't advise that anyone else does. It's your decision.And it will literally shred a soda can.
Ron
Always very accurate. Never had any problems.

04-10-2004, 06:12 PM	#4
Ron Smith User Join Date: Feb 2004 Location: Orygun Posts: 4,243 Thanks: 118 Thanked 245 Times in 150 Posts	I use 5-5.2 grains of Unique. With the 100 GR Hornady XTP HP .312 bullet. It's made for 32-20. Start off at 4.5 GR and work up. The pressures are higher because of the tighter fit of the bullet. Guns cycled perfectly. Check for pressure signs as you do so. Slug your bore and get an accurate diameter. If it's .310 or above? You'er fine. If it's less. Use another bullet. I've used this load in a .309 bore, without any problem. I don't advise that anyone else does. It's your decision.And it will literally shred a soda can. Ron Always very accurate. Never had any problems. __________________ I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode