Newbie, Thrown Into The Luger World By Accident

[day late]

Originally Posted by ithacaartist

The tiny pin is driven out from the inside of the frame. IIRC, a 1/16" punch will get it started, but use a brass one once it moves. Soak the area in your favorite penetrant if needed.

The lever is one piece, no balls behind it. There's a slight swelling/proudness on the back side of the lever which interacts with the detentes on the frame and keeps the body of the lever's handle from scraping on the frame.

I'm a locksmith. I have taken one of my picks and hooked it under the lever. There seems to be nothing but a void under there. Again, this thing was on life support when I got it. It is possible that the piece that engages the dimples in the frame has been bent upwards, so that I didn't find it. The main thing now is removing that pin. I admit, when I first tried it, it was during the original break down and clean up. At that time, I put a drop or two of solvent on the pin. It didn't move then, but since that time I've put a few down range. Maybe the vibration and the soaking time will help me get better results on my next attempt to get it out. Hey! A man can hope, right?