Take down lever repair

ithacaartist · 12-19-2019, 10:19 PM

One of the micro-welding guys might be able to help. The welding aspect would be straightforward and not take much time. It's the prep and cleanup that pile up the time/money. For you-- or someone local to you-- to create ready-to-weld pieces to submit, then work the surfaces down to what's required when it returns would be the least expensive way to take this route.
Any technician or facility with the skills to accomplish even these before and after tasks wouldn't surprise me if they charge at least $60.hr for their time, so DIY would be the way to go if you can handle it yourself.

12-19-2019, 10:19 PM	#5
ithacaartist Twice a Lifer Lifetime Forum Patron Join Date: Mar 2011 Location: Atop the highest hill in Schuyler County NY Posts: 3,401 Thanks: 7,558 Thanked 2,643 Times in 1,393 Posts	One of the micro-welding guys might be able to help. The welding aspect would be straightforward and not take much time. It's the prep and cleanup that pile up the time/money. For you-- or someone local to you-- to create ready-to-weld pieces to submit, then work the surfaces down to what's required when it returns would be the least expensive way to take this route. Any technician or facility with the skills to accomplish even these before and after tasks wouldn't surprise me if they charge at least $60.hr for their time, so DIY would be the way to go if you can handle it yourself. __________________ "... Liberty is the seed and soil, the air and light, the dew and rain of progress, love and joy."-- Robert Greene Ingersoll 1894

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode