New Member introduction and question.

Stingray75 · 07-05-2019, 04:59 AM

Hi and Thanks for the replyes.

Tok a closer look at the luger and and measured the opening of the beech. I can pull it just over a quarter of a inch open without spring pressure . After that the spring take up . Additional info is that I can pull the toggle all the way up and if I follow it down lightly holding on the knobs it won't get past the striker threshold and close. But if I let it go freely , it closes fully. Don't know if the last thing helped .

Thank

Toni

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

07-05-2019, 04:59 AM	#8
Stingray75 New User Join Date: Jun 2019 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Hi and Thanks for the replyes. Tok a closer look at the luger and and measured the opening of the beech. I can pull it just over a quarter of a inch open without spring pressure . After that the spring take up . Additional info is that I can pull the toggle all the way up and if I follow it down lightly holding on the knobs it won't get past the striker threshold and close. But if I let it go freely , it closes fully. Don't know if the last thing helped . Thank Toni