Take down lever

Major Tom · 04-21-2017, 04:05 AM

The take down lever on my DWM 1920 commercial will fall out on it's own. Looking inside the hole there is a very small curved part that upon removal seems worn. Is there replacement part? Or, can I tweak it some making the curve more pronounced?
Thanks

JTD · 04-21-2017, 08:07 AM

You can try bending it a touch if it is not broken. Tom Heller should have replacements, or someone either here, or Ebay.

cirelaw · 04-21-2017, 08:56 AM

Tom is my hero a time or two!

DonVoigt · 04-21-2017, 09:09 AM

You really don't have to post the same question on both forums.
See my answer(and others) on your other thread.

Lugerdoc · 04-21-2017, 09:10 AM

You can try bending and reanealing your old spring, but if that fails, I do have new German made one available @$25 postpaid. TH

Eugen · 04-21-2017, 11:58 AM

Major Tom, I bent one slightly and it made all the difference in properly fitting. Try it.

Major Tom · 04-22-2017, 05:19 AM

I was not aware that the 2 forums were connected. I was just trying to get the most info possible and did too. Many thanks to all who replied.

cirelaw · 04-22-2017, 11:19 AM

Tom Heller is my Hero!

Sky Zero · 04-22-2017, 11:59 AM

Quote:

Originally Posted by DonVoigt

You really don't have to post the same question on both forums.
See my answer(and others) on your other thread.

what's the other forum?

cirelaw · 04-22-2017, 12:11 PM

Jan's http://luger.gunboards.com/forum.php

Leather Neck · 04-22-2017, 12:21 PM

Quote:

Originally Posted by Major Tom

I was not aware that the 2 forums were connected. I was just trying to get the most info possible and did too. Many thanks to all who replied.

They're not connected per se, as they have separate domains and ownership. But you'll find the community is largely made up of the same people on each forum. I typically read both forums but find myself posting almost exclusively on this one for whatever reason. I think it's mainly because I posted here first lol.

cirelaw · 04-22-2017, 12:49 PM

There is never enough luger knowledge! Each offers a different perspective of our luger addiction! Eric

Sky Zero · 04-23-2017, 01:04 AM

Quote:

Originally Posted by cirelaw

Jan's http://luger.gunboards.com/forum.php

which board is more active? Just curious.

mrerick · 04-23-2017, 09:20 AM

Hi, they are both active, with much overlap and some members only at one or the other.

There is a milled away section in the middle of the spring which might look like wear. It is normal.

Major Tom · 05-25-2017, 07:00 AM

BTW, I bought the spring off Ebay. Now the lever does not fall out.

04-21-2017, 04:05 AM	#1
Major Tom User Join Date: Jan 2017 Location: S.E. Iowa Posts: 484 Thanks: 533 Thanked 228 Times in 125 Posts	Take down lever The take down lever on my DWM 1920 commercial will fall out on it's own. Looking inside the hole there is a very small curved part that upon removal seems worn. Is there replacement part? Or, can I tweak it some making the curve more pronounced? Thanks __________________ I Build Custom Pistol Boxes

04-21-2017, 09:09 AM	#4
DonVoigt User Join Date: Apr 2015 Location: near Charlotte NC Posts: 4,681 Thanks: 1,443 Thanked 4,355 Times in 2,041 Posts	You really don't have to post the same question on both forums. See my answer(and others) on your other thread. __________________ 03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie

04-21-2017, 09:10 AM	#5
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	You can try bending and reanealing your old spring, but if that fails, I do have new German made one available @$25 postpaid. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

04-21-2017, 11:58 AM	#6
Eugen User Join Date: Apr 2016 Location: Newburgh,IN Posts: 796 Thanks: 403 Thanked 639 Times in 338 Posts	Major Tom, I bent one slightly and it made all the difference in properly fitting. Try it. __________________ “God created war so that Americans would learn geography.” ― Mark Twain

04-22-2017, 05:19 AM	#7
Major Tom User Join Date: Jan 2017 Location: S.E. Iowa Posts: 484 Thanks: 533 Thanked 228 Times in 125 Posts	I was not aware that the 2 forums were connected. I was just trying to get the most info possible and did too. Many thanks to all who replied. __________________ I Build Custom Pistol Boxes

04-21-2017, 08:07 AM	#2
JTD User Join Date: Feb 2005 Location: PA Posts: 428 Thanks: 218 Thanked 410 Times in 151 Posts	You can try bending it a touch if it is not broken. Tom Heller should have replacements, or someone either here, or Ebay.

04-21-2017, 08:56 AM	#3
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,138 Times in 2,176 Posts	Tom is my hero a time or two!

04-22-2017, 11:19 AM	#8
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,138 Times in 2,176 Posts	Tom Heller is my Hero!

04-22-2017, 12:11 PM	#10
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,138 Times in 2,176 Posts	Jan's http://luger.gunboards.com/forum.php

04-22-2017, 12:49 PM	#12
cirelaw Lifer Lifetime Forum Patron Join Date: Dec 2003 Location: PORT ST LUCIE, FLORIDA Posts: 12,216 Thanks: 6,209 Thanked 4,138 Times in 2,176 Posts	There is never enough luger knowledge! Each offers a different perspective of our luger addiction! Eric

04-23-2017, 09:20 AM	#14
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,920 Thanks: 1,377 Thanked 3,135 Times in 1,518 Posts	Hi, they are both active, with much overlap and some members only at one or the other. There is a milled away section in the middle of the spring which might look like wear. It is normal. __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.

05-25-2017, 07:00 AM	#15
Major Tom User Join Date: Jan 2017 Location: S.E. Iowa Posts: 484 Thanks: 533 Thanked 228 Times in 125 Posts	BTW, I bought the spring off Ebay. Now the lever does not fall out. __________________ I Build Custom Pistol Boxes

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode