S/42 fire test, jammed b'z of 115 ammo

mario17 · 05-09-2016, 02:38 AM

Thanks kurusu and all,
posting foto with open and close toggle,
it's actually not bad, though not perfect like on kurusu' pics, (those looks like brand new))
There is some visual effect that makes that not flush expression, but it's all straight when closed.
but technically is not absolutely flush, but this little deep is same along all length of leaf spring, I'd say almost perfectly flush in the middle.

I'll prepare and try to make new good photos.
So I'll go step by step to troubleshoot,

Right Side Opened click here
Right Side Closed toggle click here

Extractor from inside click here

Thanks
Mario

kurusu · 05-09-2016, 03:44 AM

Your ejector seems to be alright.

The problem is somewhere else.

If possible get a new magazine. You will have to follow the tests DonVoigt recommended and then report back.

PS. The 2 ejectors in the picture are new. They are spares that I keep just in case.

05-09-2016, 02:38 AM	#1
mario17 User Join Date: Jan 2016 Location: California, SF Bay Area Posts: 13 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks kurusu and all, posting foto with open and close toggle, it's actually not bad, though not perfect like on kurusu' pics, (those looks like brand new)) There is some visual effect that makes that not flush expression, but it's all straight when closed. but technically is not absolutely flush, but this little deep is same along all length of leaf spring, I'd say almost perfectly flush in the middle. I'll prepare and try to make new good photos. So I'll go step by step to troubleshoot, Right Side Opened click here Right Side Closed toggle click here Extractor from inside click here Thanks Mario Last edited by mario17; 05-09-2016 at 03:27 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

05-09-2016, 03:44 AM	#2
kurusu User Join Date: Sep 2007 Posts: 1,225 Thanks: 2,679 Thanked 930 Times in 509 Posts	Your ejector seems to be alright. The problem is somewhere else. If possible get a new magazine. You will have to follow the tests DonVoigt recommended and then report back. PS. The 2 ejectors in the picture are new. They are spares that I keep just in case.