Gonzo Long Barreled P08 Project

[sheepherder]

<sigh>...I've been sidetracked again...

I wanted a M1900-style rear toggle for my long-barrel Luger, that is one with scalloped knobs. I couldn't find one cheaply enough, so I decided to make one. The M1900 toggle is .150" wider through the knob area, so I couldn't mill a 50mm crescent that the M1900 uses, I had to mill a scallop like Orimar did on their year 2000 commemorative Lugers. It worked out quite well. [Second pic below].

Then, having an artillery rear toggle leftover from eBay, I decided to try an adjustable rear sight mounted on the Luger toggle. My supply of adjustable rear sights are mostly large rifle sights, but I had a couple of Elliason [Colt Gold Cup] sights and decided to try making a base for one of those. It worked out OK, but hangs off the rear quite a bit [first pic below]. I'm not happy with it, although it should function satisfactorily. The only hangup I have is that I don't have the correct #6 tap for the elevation screw. It's even finer than NEF. So I'll have to wait until my next tooling order to get that setup finished.

In the meantime, I have an old Millett adjustable rear sight intended for an M1911 or Hi-Power that is much shorter. I'll be making a base for that in the coming weeks.