How to ream a #2 Morse taper

[Olle]

Originally Posted by postino

I really don't know enough about DRO's to tell what you're showing...

I had looked into DRO's some years ago and the ones I looked at fastened to the table and had a 'tire' that ran along the way...Didn't look too dependable or trustworthy to me...

I'm looking at several in Travers catalog and I can't tell how they measure the distance traveled except that I don't see that stupid 'tire' so I'm guessing they use some kind of linear gradient to measure with...

Even the 2-axis DRO's are expensive...

You must have looked at something pretty old, the modern ones work just like digital calipers, with a magnetic strip and a reading unit. I took a chance and bought some cheap ones (here's the 12" model: http://www.ebay.com/itm/12-Digital-R...ht_1231wt_1249), and they have worked great. It's a "universal fit" so it took a bit of thinking and tinkering to come up with good locations, brackets etc, but they make life so much easier. No more counting turns, just crank it and read the display.