opinion on wiemar

lugersrkewl · 01-25-2013, 01:15 AM

dang. I have the link to jans site where I found this posted best I can do. forgetting the price and originality (dont want to offend anyone at this point ) can my other questions be answered?
here is the link http://luger.gunboards.com/showthrea...l-Three-lugers
thanks

Dwight Gruber · 01-25-2013, 03:45 AM

Thanks for the link. I went there and lightened up the pictures to make things easier to see.

The inspection and prower-proof eagle stamped on this pistol is recognized as a Weimsr-era (date uncertain) power-proof. It is rarely encountered, and is not expected to be found as inspection/acceptance marks (the first two of the three on the receiver).

The effect on the value of a Luger with the absence, presence, or removal of the sear safety depends entirely on teh variation of the pistol. Absent any other information, the removed sear safety will have the most negative effect.

There is evidence of grinding on the receiver top. What may or may not have been there cannot be speculated.

Without the serial number and a picture of the bottom of the barrel (at the very least), nothing more can be said about this Luger.

--Dwight

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-25-2013, 01:15 AM	#1
lugersrkewl Patron LugerForum Patron Join Date: Feb 2012 Location: Ussr Posts: 425 Thanks: 198 Thanked 75 Times in 58 Posts	dang. I have the link to jans site where I found this posted best I can do. forgetting the price and originality (dont want to offend anyone at this point ) can my other questions be answered? here is the link http://luger.gunboards.com/showthrea...l-Three-lugers thanks

01-25-2013, 03:45 AM	#2
Dwight Gruber User Join Date: Jun 2002 Location: Portland, Oregon Posts: 3,908 Thanks: 0 Thanked 1,330 Times in 435 Posts	Thanks for the link. I went there and lightened up the pictures to make things easier to see. The inspection and prower-proof eagle stamped on this pistol is recognized as a Weimsr-era (date uncertain) power-proof. It is rarely encountered, and is not expected to be found as inspection/acceptance marks (the first two of the three on the receiver). The effect on the value of a Luger with the absence, presence, or removal of the sear safety depends entirely on teh variation of the pistol. Absent any other information, the removed sear safety will have the most negative effect. There is evidence of grinding on the receiver top. What may or may not have been there cannot be speculated. Without the serial number and a picture of the bottom of the barrel (at the very least), nothing more can be said about this Luger. --Dwight