1917 DWM Luger Toggle Link Pin problem

Kitkat041836 · 06-01-2012, 10:49 AM

My way of fixing this problem is easy and simple.I take some
Rubbing Alcohol on a q-tip and clean the pin and right side of
the pin hole,then I use a little Permatex medium strength
Threadlocker Blue that you can get at any auto store,and
put some on the right side of the toggle pin hole and put the pin in and let it set overnight.If you do this the pin will not
work out again.
Thanks George

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-01-2012, 10:49 AM	#1
Kitkat041836 RIP Join Date: Feb 2009 Posts: 195 Thanks: 0 Thanked 21 Times in 18 Posts	My way of fixing this problem is easy and simple.I take some Rubbing Alcohol on a q-tip and clean the pin and right side of the pin hole,then I use a little Permatex medium strength Threadlocker Blue that you can get at any auto store,and put some on the right side of the toggle pin hole and put the pin in and let it set overnight.If you do this the pin will not work out again. Thanks George