Repro eBay holster?

lugerholsterrepair · 05-05-2012, 10:49 PM

Look at the buckle & roller..Roller is too short, buckle is too square

The right belt loop is lower than the left!

Top lid hinge is not sewn over into the magazine pouch

Mag pouch is too high and squared off

stitching at the bottom of the left loop to the right for the pull-up is spaced away from the bottom of the loop. Should be an extension of the loop

The interior tool pouch is too fat at the bottom. Out or proportion.

This holster and many other repro's just SCREAM reproduction if you look them over as Doug and Bill have indicated...

05-05-2012, 10:49 PM	#1
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,775 Thanks: 4,995 Thanked 3,133 Times in 1,439 Posts	Look at the buckle & roller..Roller is too short, buckle is too square The right belt loop is lower than the left! Top lid hinge is not sewn over into the magazine pouch Mag pouch is too high and squared off stitching at the bottom of the left loop to the right for the pull-up is spaced away from the bottom of the loop. Should be an extension of the loop The interior tool pouch is too fat at the bottom. Out or proportion. This holster and many other repro's just SCREAM reproduction if you look them over as Doug and Bill have indicated... __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode