Malfunction loading 7.65 Para - Page 2

alanint · 04-14-2012, 02:55 PM

Congratulations, Roberto!!

rhuff · 04-14-2012, 06:19 PM

Glad to hear that you got your Luger running correctly and it is reliable, plus you demonstrated how accurate a Luger will shoot in the proper hands.

bobpuxi · 04-15-2012, 01:17 PM

Hi
The last one, the firing pin does not activate
I'll try to clean as much as possible.
Thk I'll let you know
Rob

alanint · 04-15-2012, 03:01 PM

Your sear is not resetting. Remove and clean the sear and see if the small plunger at the front is moving freely. In the past, I have taken a dremel with a polishing wheel and have slightly broken the edge of the plunger by polishing. This is the edge which faces out when installed in the pistol. By polishing the outer edge of the plunger, it helps it to ride over the trigger lever and reset properly.

bobpuxi · 04-15-2012, 05:18 PM

Quote:

Originally Posted by alanint

Your sear is not resetting. Remove and clean the sear and see if the small plunger at the front is moving freely. In the past, I have taken a dremel with a polishing wheel and have slightly broken the edge of the plunger by polishing. This is the edge which faces out when installed in the pistol. By polishing the outer edge of the plunger, it helps it to ride over the trigger lever and reset properly.

Hi Alan,
what do you mean for sear? I did not find it in the scheme on the technical parts!
sorry
Rob

rhuff · 04-15-2012, 07:01 PM

It is called the trigger bar, or sear bar, or just the sear. It is located on the left side of the luger, and is what releases the firing pin to travel forward.

alanint · 04-15-2012, 08:14 PM

Exactly. The small bar in the upper receiver, which releases the firing pin when the trigger is pulled. This bar can be removed from the upper receiver by gently prying up and pulling forward the flat spring, which holds it in place. By removing this sear bar, you can clean around and inside it. The small barrel shaped plunger needs to move freely in and out and as I mentioned, by buffing a slight ramp in the top of the plunger on the outside, where it meets the trigger bar, it will help this plunger over ride the "L" shaped trigger bar

bobpuxi · 04-16-2012, 06:38 AM

Ill do immediately and let you know.
THK
Great Forum!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-14-2012, 02:55 PM	#1
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,917 Times in 1,193 Posts	Congratulations, Roberto!!

04-14-2012, 06:19 PM	#2
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,315 Thanks: 2,748 Thanked 998 Times in 733 Posts	Glad to hear that you got your Luger running correctly and it is reliable, plus you demonstrated how accurate a Luger will shoot in the proper hands.

04-15-2012, 01:17 PM	#3
bobpuxi User Join Date: Apr 2012 Location: Italy Posts: 9 Thanks: 6 Thanked 2 Times in 2 Posts	Hi The last one, the firing pin does not activate I'll try to clean as much as possible. Thk I'll let you know Rob

04-15-2012, 03:01 PM	#4
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,917 Times in 1,193 Posts	Your sear is not resetting. Remove and clean the sear and see if the small plunger at the front is moving freely. In the past, I have taken a dremel with a polishing wheel and have slightly broken the edge of the plunger by polishing. This is the edge which faces out when installed in the pistol. By polishing the outer edge of the plunger, it helps it to ride over the trigger lever and reset properly.

04-15-2012, 07:01 PM	#6
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,315 Thanks: 2,748 Thanked 998 Times in 733 Posts	It is called the trigger bar, or sear bar, or just the sear. It is located on the left side of the luger, and is what releases the firing pin to travel forward.

04-15-2012, 08:14 PM	#7
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,917 Times in 1,193 Posts	Exactly. The small bar in the upper receiver, which releases the firing pin when the trigger is pulled. This bar can be removed from the upper receiver by gently prying up and pulling forward the flat spring, which holds it in place. By removing this sear bar, you can clean around and inside it. The small barrel shaped plunger needs to move freely in and out and as I mentioned, by buffing a slight ramp in the top of the plunger on the outside, where it meets the trigger bar, it will help this plunger over ride the "L" shaped trigger bar

04-16-2012, 06:38 AM	#8
bobpuxi User Join Date: Apr 2012 Location: Italy Posts: 9 Thanks: 6 Thanked 2 Times in 2 Posts	Ill do immediately and let you know. THK Great Forum!!