Troubleshooting my new luger.

[Frater]

Ok, back again, now with fresh photos.

Postino: Yup I live in sweden.

Extractor with loaded chamber.



Extractor with empty chamber, note slight deformation in breech behind extractor, not sure if this is usual.
The extractor will not move back and forth in the space so probably it has been replaced at some time.



Sideplate inside. What is the swiss cross about?



Sear bar detail, Safety has been slightly engaged to show available space for movement of the sear bar when trigger is depressed while on safe.



Breech left side. Sight on rear toggle appears to be modified with a higher square cut plate. Good for target shooting, the current front sight is square too.



Breech right side



Firing pin with broken spring guide rod, locking lug looks ok though. More swiss pluses...



Trigger assembly


Some notes.
The gun happily feeds ammunition when manually cycling the toggle, ejecting works fine with no sticking.
The trigger feels very good though on the light side, firing pin release comes as a bit of a surprise with no last moment sticking.
The barrel looks brand new inside, no scratches nor any residue.
The issue with the safety still bothers me but I will keep it in mind when at the range.

I intend to fire this gun for the first time tomorrow afternoon unless someone shouts. =)

Cheers!