Stuck spring plunger on the sear bar

linoman · 06-05-2011, 11:42 AM

It was stuck, gave it a good cleaning and lube and it worked itself out. Return trip to the range and it went through 50 rounds without incident. Looks like I got lucky on this one...

sheepherder · 06-05-2011, 09:28 PM

Quote:

Originally Posted by linoman

Picked up a 1917 Erfurt shooter at the local gun show yesterday (how'd I do for $500?)...

Quote:

Originally Posted by linoman

... Looks like I got lucky on this one...

...

...$500 for an Erfurt is more than luck...It's divine intervention...

(Why can't I find $500 Erfurts???)

dwm1918 · 07-27-2011, 09:03 PM

I had the same problem on a Erfurt 1914 artillery model. Tried soaking but no luck. Got a large magnet and it pulled the plunger right out. The small pin that holds the plunger and spring in place can be removed with a paper clip that has been straightened out.

Thor · 07-28-2011, 10:21 AM

Sometimes when I dont have the proper punch I will make one out of a push pin with the sharp end cut off with diagonal cutters. For really stubborn small pins soak in kroil for a couple of days, then put in a small zip lock and put in the freezer for a day then take out and try the pin again, usually comes out.

07-28-2011, 10:21 AM	#4
Thor User Join Date: Jun 2002 Location: Rio Rancho, New Mexico Posts: 4,583 Thanks: 958 Thanked 970 Times in 276 Posts	Sometimes when I dont have the proper punch I will make one out of a push pin with the sharp end cut off with diagonal cutters. For really stubborn small pins soak in kroil for a couple of days, then put in a small zip lock and put in the freezer for a day then take out and try the pin again, usually comes out. __________________ Thor's Luger Clinic http://members.rennlist.com/lugerman/ Ted Green (Thor Yaller Boots) 725 Western Hills Dr SE, Rio Rancho, NM 87124 915-526-8925 Email thor340@aol.com ----------------------------------- John3:3 Jesus answered and said to him, "Most assuredly, I say to you, unless one is born again, he cannot see the kingdom of God."

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

06-05-2011, 11:42 AM	#1
linoman New User Join Date: Apr 2011 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	It was stuck, gave it a good cleaning and lube and it worked itself out. Return trip to the range and it went through 50 rounds without incident. Looks like I got lucky on this one...

07-27-2011, 09:03 PM	#3
dwm1918 User Join Date: Nov 2003 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts	I had the same problem on a Erfurt 1914 artillery model. Tried soaking but no luck. Got a large magnet and it pulled the plunger right out. The small pin that holds the plunger and spring in place can be removed with a paper clip that has been straightened out.