First luger - won't work - need help!

rivieraranch · 01-11-2011, 10:24 PM

I doubt you are in as bad shape as you fear.

You might need a new magazine which should take care of feeding problems. You definitely have to tweak the side plate and trigger parts some. The trigger should work on the first pull

The toggle pin should not fall out freely. It should be a little snug. This is not a problem. The breechblock being tight is not bad. If there were something wrong with it the gun wouldn't cycle. The parts on your gun fitting together snug contributes to accuracy.

You should indicate where you are located and somebody can help you.

I am by no means an expert, but believe that your problem can be taken care of easily.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-11-2011, 10:24 PM	#3
rivieraranch User Join Date: Sep 2010 Location: South Florida Posts: 101 Thanks: 4 Thanked 4 Times in 4 Posts	I doubt you are in as bad shape as you fear. You might need a new magazine which should take care of feeding problems. You definitely have to tweak the side plate and trigger parts some. The trigger should work on the first pull The toggle pin should not fall out freely. It should be a little snug. This is not a problem. The breechblock being tight is not bad. If there were something wrong with it the gun wouldn't cycle. The parts on your gun fitting together snug contributes to accuracy. You should indicate where you are located and somebody can help you. I am by no means an expert, but believe that your problem can be taken care of easily.