lapua ammo

mrerick · 10-18-2010, 09:42 PM

You should have a 21 or 22 turn recoil spring. I believe that this is the "default" spring that they ship in the Wolff Luger spring kit. It's the correct one for a late Mauser Luger like yours. This is the spring that they include with the complete Luger spring kit (along with the extractor spring and the trigger spring).

They also have a 3 recoil spring kit with springs cut to different lengths.
There is a fairly heavy trigger pull on my Luger, especially when compared with other pistols in Single Action firing.

I have been using my own reloads. 4.0gn of TiteGroup powder behind a 129gn cast lead bullet. This is a slightly reduced load. Other than that, it's Winchester white box 115gn FMJ.

Marc

10-18-2010, 09:42 PM	#25
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,925 Thanks: 1,377 Thanked 3,139 Times in 1,520 Posts	You should have a 21 or 22 turn recoil spring. I believe that this is the "default" spring that they ship in the Wolff Luger spring kit. It's the correct one for a late Mauser Luger like yours. This is the spring that they include with the complete Luger spring kit (along with the extractor spring and the trigger spring). They also have a 3 recoil spring kit with springs cut to different lengths. There is a fairly heavy trigger pull on my Luger, especially when compared with other pistols in Single Action firing. I have been using my own reloads. 4.0gn of TiteGroup powder behind a 129gn cast lead bullet. This is a slightly reduced load. Other than that, it's Winchester white box 115gn FMJ. Marc __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode