Black plastic mag bases

vernonsmith · 08-27-2009, 10:24 PM

Can anyone advise when the black plastic mag bases (no number at bottom) were used in? Were they ONLY in the code 42 Lugers? Or code S/42 and byf as well?

Thanks in advance.

MFC · 08-28-2009, 12:49 AM

Vernon,
I beleive they were issued sometime during 41 - 42 production and continued until the end of 42 BYF production. I dont think they are correct for S/42.

Frank · 08-28-2009, 10:33 AM

It is my belief that the black plastic bottom fxo magazines were introduced after the U-Block of the 41 byf production and supplied until the end of Luger production. Blank (un-numbered) aluminum bottom fxo magazines were supplied in the early part of this time frame, as well.

This theory is also supported by some of the more knowledgeable Luger collectors, BUT not all.

MFC · 08-28-2009, 10:40 PM

Frank,
I'm sure you are correct. I used Aaron's Standard Catalog of Lugers for reference. I know that there are many mistakes in it.
Were the black plastic bottom mag and black plastic grips issued at the same time, or did one show up before the other?
I'm sure the confusion is from people changing there original wood grips and aluminum bottomed mags to plastic, to make a "BW".

Frank · 08-29-2009, 10:33 AM

Mike, it's my understanding that the grips and bottoms were authorized in July 1941.

MFC · 08-30-2009, 03:56 AM

Frank,
Thanks.

Lugerdoc · 08-30-2009, 09:39 AM

Mike, I doubt that there was any correlation of the BP grips (have read that these were used as available from late 1939) and the BP mag bottoms. TH

Mike B · 08-30-2009, 10:00 AM

Greetings,
I have a 1940 dated 42 code with black plastic grips and a matching aluminum bottom mag. The grips are the correct type for the year and certainly look original to me.

Mike

Frank · 08-30-2009, 11:13 AM

Hi All, for those that have 1939, 1940 or early 1941 Military Mauser Lugers with Black "Bakelite" Grips and wish to think they are original, so be it.

HOWEVER, there is absolutely no proof they were installed by the Mauser Factory. They easily could be armorer replacements or replaced post war.

Mike B · 08-30-2009, 09:38 PM

Frank,
Please read this thread on Jan Still's forum.

Mike
http://luger.gunboards.com/showthrea...eferrerid=1734

Frank · 08-31-2009, 10:25 AM

Mike B, I participated in that study!! Please again read my comments above.

"HOWEVER, there is absolutely no proof they were installed by the Mauser Factory. They easily could be armorer replacements or replaced post war."

I once owned a 1917 DWM with proper Bakelite Grips. Then according to the data, these grips were used as far back as 1917??

08-27-2009, 10:24 PM	#1
vernonsmith User Join Date: Jul 2009 Posts: 80 Thanks: 0 Thanked 1 Time in 1 Post	Black plastic mag bases Can anyone advise when the black plastic mag bases (no number at bottom) were used in? Were they ONLY in the code 42 Lugers? Or code S/42 and byf as well? Thanks in advance.

08-28-2009, 12:49 AM	#2
MFC User Join Date: Sep 2006 Location: Louisiana Posts: 1,237 Thanks: 183 Thanked 281 Times in 162 Posts	Vernon, I beleive they were issued sometime during 41 - 42 production and continued until the end of 42 BYF production. I dont think they are correct for S/42. __________________ Mike C.

08-28-2009, 10:40 PM	#4
MFC User Join Date: Sep 2006 Location: Louisiana Posts: 1,237 Thanks: 183 Thanked 281 Times in 162 Posts	Frank, I'm sure you are correct. I used Aaron's Standard Catalog of Lugers for reference. I know that there are many mistakes in it. Were the black plastic bottom mag and black plastic grips issued at the same time, or did one show up before the other? I'm sure the confusion is from people changing there original wood grips and aluminum bottomed mags to plastic, to make a "BW". __________________ Mike C.

08-30-2009, 03:56 AM	#6
MFC User Join Date: Sep 2006 Location: Louisiana Posts: 1,237 Thanks: 183 Thanked 281 Times in 162 Posts	Frank, Thanks. __________________ Mike C.

08-30-2009, 09:39 AM	#7
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Mike, I doubt that there was any correlation of the BP grips (have read that these were used as available from late 1939) and the BP mag bottoms. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

08-28-2009, 10:33 AM	#3
Frank RIP Patron LugerForum Patron Join Date: Jun 2002 Location: Hot & Dry PHX, AZ Posts: 2,078 Thanks: 24 Thanked 164 Times in 87 Posts	It is my belief that the black plastic bottom fxo magazines were introduced after the U-Block of the 41 byf production and supplied until the end of Luger production. Blank (un-numbered) aluminum bottom fxo magazines were supplied in the early part of this time frame, as well. This theory is also supported by some of the more knowledgeable Luger collectors, BUT not all.

08-29-2009, 10:33 AM	#5
Frank RIP Patron LugerForum Patron Join Date: Jun 2002 Location: Hot & Dry PHX, AZ Posts: 2,078 Thanks: 24 Thanked 164 Times in 87 Posts	Mike, it's my understanding that the grips and bottoms were authorized in July 1941.

08-30-2009, 10:00 AM	#8
Mike B Lifer Lifetime Forum Patron Join Date: Apr 2005 Location: South Louisiana Posts: 979 Thanks: 1 Thanked 272 Times in 100 Posts	Greetings, I have a 1940 dated 42 code with black plastic grips and a matching aluminum bottom mag. The grips are the correct type for the year and certainly look original to me. Mike

08-30-2009, 11:13 AM	#9
Frank RIP Patron LugerForum Patron Join Date: Jun 2002 Location: Hot & Dry PHX, AZ Posts: 2,078 Thanks: 24 Thanked 164 Times in 87 Posts	Hi All, for those that have 1939, 1940 or early 1941 Military Mauser Lugers with Black "Bakelite" Grips and wish to think they are original, so be it. HOWEVER, there is absolutely no proof they were installed by the Mauser Factory. They easily could be armorer replacements or replaced post war.

08-30-2009, 09:38 PM	#10
Mike B Lifer Lifetime Forum Patron Join Date: Apr 2005 Location: South Louisiana Posts: 979 Thanks: 1 Thanked 272 Times in 100 Posts	Frank, Please read this thread on Jan Still's forum. Mike http://luger.gunboards.com/showthrea...eferrerid=1734

08-31-2009, 10:25 AM	#11
Frank RIP Patron LugerForum Patron Join Date: Jun 2002 Location: Hot & Dry PHX, AZ Posts: 2,078 Thanks: 24 Thanked 164 Times in 87 Posts	Mike B, I participated in that study!! Please again read my comments above. "HOWEVER, there is absolutely no proof they were installed by the Mauser Factory. They easily could be armorer replacements or replaced post war." I once owned a 1917 DWM with proper Bakelite Grips. Then according to the data, these grips were used as far back as 1917??

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode