inherited

Ron Wood · 06-17-2007, 05:20 PM

As posted by Tac Foley (and I think the same method as mentioned by Steinar), it is easy to retract the receiver enough to rotate the takedown lever. Remove the magazine, and with the safety off, grip the frame and toggle knobs as shown in the following photo provided by Tac. Just squeeze so that the barrel/receiver group slides back until the toggle knobs contact the frame ramps and then rotate the takedown lever with your other hand. It works just as well for toggle-lock and grip safety Lugers.

06-17-2007, 05:20 PM	#20
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,051 Thanks: 1,121 Thanked 5,287 Times in 1,728 Posts	As posted by Tac Foley (and I think the same method as mentioned by Steinar), it is easy to retract the receiver enough to rotate the takedown lever. Remove the magazine, and with the safety off, grip the frame and toggle knobs as shown in the following photo provided by Tac. Just squeeze so that the barrel/receiver group slides back until the toggle knobs contact the frame ramps and then rotate the takedown lever with your other hand. It works just as well for toggle-lock and grip safety Lugers. __________________ If it's made after 1918...it's a reproduction

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode