SIG Handguns

zeke1312 · 04-27-2007, 02:48 PM

I'm reviewing guns that are well suited for concealed carry. I have a Colt MKIII 380 and a Colt Pony Pocketlite. Recently I looked Sig P232 380 which I believe is made in Germany. The fit and finish compared to my Colts is like night and day!

Any folks here that have a Sig and can recommend their products?

Ron Smith · 04-27-2007, 10:07 PM

Chuck,

I've got an old Sig 220 .45 ACP. I carry it in a Galco paddle hoster on a fairly regular basis. After about 5 min. I forget that it is there. So I would think a Sig .380 would be a breeze. The 220 has never had a glitch with any type of ammo I have fired.

IMO, Sig s are far and away one of the best , most reliable, best engineered handguns on the market.

Ain't no Luger,.... but this ain't 1925 neither.

Ron

waltherguy · 04-28-2007, 08:39 AM

I had a Sig 226 in 9mm and I thought it was a great gun. Mine was also German made. The thing I liked most about Sig is its one of the decreasingly few new semi guns on the market that is actually metal instead of polymer...

the gunman · 04-28-2007, 10:59 AM

I to like Ron have Sig 220 in.45 which I sometimes carry one sweet .45 and like Ron says flawless eats just about anything . If I had to pick one gun out of the many I own for defence this would be it.

zeke1312 · 04-29-2007, 01:48 PM

I did pick up a new P232 stainless/alloy, .380. I compared Kahr, Walther and SIG. The Kahr slide felt it was riding on rough rails when racked. The Walther trigger guard was too small for my finger. Both were heavier than the SIG P232. The overall fit and finish on the SIG was obvious. It is better. Don't know where the Kahr and Walther are made. The SIG has "Made in Germany" on the slide. I like that. Maybe I'm biased!

Anyhow, the SIG replaces my Colt MarkIV Series 80 as a concealed gun.

Pete Ebbink · 04-29-2007, 01:57 PM

I shot one of the SIG P-232's in .380 a few years back at a local indoor shooting range with rental guns up in Seattle.

I found this gun's double-action trigger pull quite LONG and it made my first-shot just awful...

fg42 · 04-30-2007, 11:31 PM

Tac Most of those "Made in Germany" Walthers are from France!

Ron Smith · 04-30-2007, 11:43 PM

Tac,

Not sure where they are made either. I like Kahrs, but can't get past the owner. Kahr Arms is , or was , owned by Rev. Sun Myung Moon of Unification Church fame. The "Moonies" own it, or did.

Ron

zeke1312 · 05-01-2007, 11:59 AM

Here are markings on the SIGP232:

http://forum.lugerforum.com/lfupload..._001_copy1.jpg

Do these markings indicate where the gun was built?

Another view:

http://forum.lugerforum.com/lfupload..._002_copy1.jpg

Also: Please explain the difference between :

.380 caliber and 9mm Kurz

Ron Smith · 05-01-2007, 12:23 PM

Chuck,

No difference between .380 and 9mm Kurtz. Kurtz is German for "Short".

.380 and 9mm Short. Just different names for the same cartridge.

Like 9mm Parabellum , 9mm Luger and 9x19. All the same....

Ron

waltherguy · 05-01-2007, 12:51 PM

Cool story about your PP Tac! Compairing a German Made PP/PPK/PPKs to the modern S&W U.S. made Walthers is like night & day in my opinion. Personally as far as post war pistols go, I liked the German made Walther PP series that was imported by Interarms.

thegundude · 05-01-2007, 12:59 PM

It's not a SIG but it is a great CCW piece.

S&W Chiefs Special in .45 ACP.

Ron Smith · 05-01-2007, 01:27 PM

Steve,

Ya got more holsters than gun...

zeke1312 · 05-01-2007, 07:08 PM

Pictured are my CCW carries that are being replaced by my SIG P232:

http://forum.lugerforum.com/lfupload/sigp232.jpg

SteveM · 05-01-2007, 08:31 PM

I have been carrying a Keltec P3AT 380 for a couple of months now. Owning much less carrying a "plastic" pistol is way out of character for me as I really like steel pistols. What made my mind up was it can easily be carried in the front or rear pocket(jeans, shorts etc..), is double action only, and very light not to mention it is also very accurate. Still can't believe I bought a plastic pistol.

thegundude · 05-01-2007, 10:48 PM

Quote:

Originally posted by Ron Smith
Steve,

Ya got more holsters than gun...

LOL!

One for every carry situation. Inside-the-pants, strong side paddle, small-of-the-back and shoulder. Don Hume leather, best stuff on the planet...

And they actually MAKE a holster for my gun, several in fact. I've seen very few holsters for my carry gun.

thegundude · 05-01-2007, 10:51 PM

Quote:

Originally posted by SteveM
Still can't believe I bought a plastic pistol.

They sure make carrying easier. Mine weighs a lot, but still way less than any other steel gun. I've been looking at those KelTecs for a while now. Seems I saw a .45 version at the SHOT Show this year too...

Crotalus · 05-03-2007, 12:45 PM

I have a Sig P220 .45ACP and have no complaints. The non-"conceal carry" model may be too big for some but I'm 6'1" and it is held close to my body with a desantis pancake holster.

04-27-2007, 02:48 PM	#1
zeke1312 User Join Date: Jul 2005 Posts: 167 Thanks: 0 Thanked 1 Time in 1 Post	SIG Handguns I'm reviewing guns that are well suited for concealed carry. I have a Colt MKIII 380 and a Colt Pony Pocketlite. Recently I looked Sig P232 380 which I believe is made in Germany. The fit and finish compared to my Colts is like night and day! Any folks here that have a Sig and can recommend their products?

04-27-2007, 10:07 PM	#2
Ron Smith User Join Date: Feb 2004 Location: Orygun Posts: 4,243 Thanks: 118 Thanked 245 Times in 150 Posts	Chuck, I've got an old Sig 220 .45 ACP. I carry it in a Galco paddle hoster on a fairly regular basis. After about 5 min. I forget that it is there. So I would think a Sig .380 would be a breeze. The 220 has never had a glitch with any type of ammo I have fired. IMO, Sig s are far and away one of the best , most reliable, best engineered handguns on the market. Ain't no Luger,.... but this ain't 1925 neither. Ron __________________ I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said...

04-28-2007, 08:39 AM	#3
waltherguy User Join Date: Jan 2006 Location: FL Posts: 201 Thanks: 5 Thanked 0 Times in 0 Posts	I had a Sig 226 in 9mm and I thought it was a great gun. Mine was also German made. The thing I liked most about Sig is its one of the decreasingly few new semi guns on the market that is actually metal instead of polymer... __________________ "In a man to man fight the winner is the one who puts an extra round in his magazine" -Field Marshal Erwin Rommel

04-30-2007, 11:43 PM	#8
Ron Smith User Join Date: Feb 2004 Location: Orygun Posts: 4,243 Thanks: 118 Thanked 245 Times in 150 Posts	Tac, Not sure where they are made either. I like Kahrs, but can't get past the owner. Kahr Arms is , or was , owned by Rev. Sun Myung Moon of Unification Church fame. The "Moonies" own it, or did. Ron __________________ I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said...

05-01-2007, 12:23 PM	#10
Ron Smith User Join Date: Feb 2004 Location: Orygun Posts: 4,243 Thanks: 118 Thanked 245 Times in 150 Posts	Chuck, No difference between .380 and 9mm Kurtz. Kurtz is German for "Short". .380 and 9mm Short. Just different names for the same cartridge. Like 9mm Parabellum , 9mm Luger and 9x19. All the same.... Ron __________________ I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said...

04-28-2007, 10:59 AM	#4
the gunman User Join Date: Mar 2003 Location: Leland NC 28451 Posts: 1,017 Thanks: 1 Thanked 13 Times in 12 Posts	I to like Ron have Sig 220 in.45 which I sometimes carry one sweet .45 and like Ron says flawless eats just about anything . If I had to pick one gun out of the many I own for defence this would be it.

04-29-2007, 01:48 PM	#5
zeke1312 User Join Date: Jul 2005 Posts: 167 Thanks: 0 Thanked 1 Time in 1 Post	I did pick up a new P232 stainless/alloy, .380. I compared Kahr, Walther and SIG. The Kahr slide felt it was riding on rough rails when racked. The Walther trigger guard was too small for my finger. Both were heavier than the SIG P232. The overall fit and finish on the SIG was obvious. It is better. Don't know where the Kahr and Walther are made. The SIG has "Made in Germany" on the slide. I like that. Maybe I'm biased! Anyhow, the SIG replaces my Colt MarkIV Series 80 as a concealed gun.

04-29-2007, 01:57 PM	#6
Pete Ebbink User Join Date: Jun 2002 Location: The USA Posts: 5,919 Thanks: 0 Thanked 6 Times in 4 Posts	I shot one of the SIG P-232's in .380 a few years back at a local indoor shooting range with rental guns up in Seattle. I found this gun's double-action trigger pull quite LONG and it made my first-shot just awful...

04-30-2007, 11:31 PM	#7
fg42 User Join Date: Jun 2002 Location: Iowa Posts: 90 Thanks: 0 Thanked 0 Times in 0 Posts	Tac Most of those "Made in Germany" Walthers are from France!

05-01-2007, 11:59 AM	#9
zeke1312 User Join Date: Jul 2005 Posts: 167 Thanks: 0 Thanked 1 Time in 1 Post	Here are markings on the SIGP232: http://forum.lugerforum.com/lfupload..._001_copy1.jpg Do these markings indicate where the gun was built? Another view: http://forum.lugerforum.com/lfupload..._002_copy1.jpg Also: Please explain the difference between : .380 caliber and 9mm Kurz

05-01-2007, 12:51 PM	#11
waltherguy User Join Date: Jan 2006 Location: FL Posts: 201 Thanks: 5 Thanked 0 Times in 0 Posts	Cool story about your PP Tac! Compairing a German Made PP/PPK/PPKs to the modern S&W U.S. made Walthers is like night & day in my opinion. Personally as far as post war pistols go, I liked the German made Walther PP series that was imported by Interarms. __________________ "In a man to man fight the winner is the one who puts an extra round in his magazine" -Field Marshal Erwin Rommel

05-01-2007, 12:59 PM	#12
thegundude User Join Date: Jan 2005 Location: Western NC Posts: 1,137 Thanks: 3 Thanked 16 Times in 3 Posts	It's not a SIG but it is a great CCW piece. S&W Chiefs Special in .45 ACP. __________________ Keep your knees in the breeze and your iron in the air. ~Steve

05-01-2007, 01:27 PM	#13
Ron Smith User Join Date: Feb 2004 Location: Orygun Posts: 4,243 Thanks: 118 Thanked 245 Times in 150 Posts	Steve, Ya got more holsters than gun... __________________ I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said...

05-01-2007, 07:08 PM	#14
zeke1312 User Join Date: Jul 2005 Posts: 167 Thanks: 0 Thanked 1 Time in 1 Post	Pictured are my CCW carries that are being replaced by my SIG P232: http://forum.lugerforum.com/lfupload/sigp232.jpg

05-01-2007, 08:31 PM	#15
SteveM User Join Date: Jun 2002 Location: Texas Posts: 1,016 Thanks: 94 Thanked 275 Times in 137 Posts	I have been carrying a Keltec P3AT 380 for a couple of months now. Owning much less carrying a "plastic" pistol is way out of character for me as I really like steel pistols. What made my mind up was it can easily be carried in the front or rear pocket(jeans, shorts etc..), is double action only, and very light not to mention it is also very accurate. Still can't believe I bought a plastic pistol.

05-03-2007, 12:45 PM	#18
Crotalus User Join Date: Aug 2006 Location: Richmond, VA Posts: 68 Thanks: 0 Thanked 2 Times in 1 Post	I have a Sig P220 .45ACP and have no complaints. The non-"conceal carry" model may be too big for some but I'm 6'1" and it is held close to my body with a desantis pancake holster.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode