misfeed

Sieger · 03-04-2007, 02:49 PM

Hi:

If the ammo is too weak, and the ammo you are using is too weak, extraction and hold-open will not be reliable.

Also, if substituting the ammo doesn't solve the problem, I'd check the strength of the extractor spring. I had a weak one last year, in one of my 9mms, and it lead to a similar problem.

A little while ago, some Finnish 7.65 was available through a few distributors, in fact, Samco of Miami Florida had some the last time I checked. This ammo is within spec. and should operate your pistol properly.

Sieger

03-04-2007, 02:49 PM	#1
Sieger User Join Date: Jul 2003 Location: New York, NY Posts: 1,579 Thanks: 2,142 Thanked 402 Times in 251 Posts	Stove-Pipes Hi: If the ammo is too weak, and the ammo you are using is too weak, extraction and hold-open will not be reliable. Also, if substituting the ammo doesn't solve the problem, I'd check the strength of the extractor spring. I had a weak one last year, in one of my 9mms, and it lead to a similar problem. A little while ago, some Finnish 7.65 was available through a few distributors, in fact, Samco of Miami Florida had some the last time I checked. This ammo is within spec. and should operate your pistol properly. Sieger

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode