Soaking a Luger in Solvent

Marvin · 03-15-2006, 03:56 PM

Dwight,

You are correct that is will disolve copper. I always use it on 0000 steel wool, or a small piece of cloth. I use it only in a rust effected area, and immediately wipe it off and oil good as John S. stated. I did buy a decent Romanian .22 Training Rifle a few weeks ago and I put some Blue Wonder on a piece of cloth, wiped the entire action/barrel, and it sure brought the "luster" back to the bluing. Of course, I oiled it good after taking the Cleaner off.

With Lugers, I have always been veeeeery careful with any chemical, steel wool or bronze wool. Normally I try to use a cloth with oil to clean

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-15-2006, 03:56 PM	#1
Marvin User Join Date: Jun 2002 Location: Upstate S.C. Posts: 1,132 Thanks: 0 Thanked 0 Times in 0 Posts	Dwight, You are correct that is will disolve copper. I always use it on 0000 steel wool, or a small piece of cloth. I use it only in a rust effected area, and immediately wipe it off and oil good as John S. stated. I did buy a decent Romanian .22 Training Rifle a few weeks ago and I put some Blue Wonder on a piece of cloth, wiped the entire action/barrel, and it sure brought the "luster" back to the bluing. Of course, I oiled it good after taking the Cleaner off. With Lugers, I have always been veeeeery careful with any chemical, steel wool or bronze wool. Normally I try to use a cloth with oil to clean