Luger Mainspring Installation-Step 1 <img BORDER="0" src='http://boards.rennlist.com/luger/pic.gif'>

Thor · 03-21-2002, 02:12 AM

This is the way I have recently been installing them, takes me about 5 minutes. No jigs, no vices, just a few simple tools and I dont even need cuss words any more. Hugh will probably laugh at the method I have come up with.

1. Luger parts: Locate the frame, recoil lever, recoil lever PIN, main spring and main spring GUIDE ROD.

2. TOOLS: Pliers, tapered long pin punch or screw driver shaft that will fit through the guide rod hole, screw driver

http://boards.rennlist.com/upload/MSpring1.jpg

03-21-2002, 02:12 AM	#1
Thor User Join Date: Jun 2002 Location: Rio Rancho, New Mexico Posts: 4,583 Thanks: 958 Thanked 971 Times in 277 Posts	Luger Mainspring Installation-Step 1 This is the way I have recently been installing them, takes me about 5 minutes. No jigs, no vices, just a few simple tools and I dont even need cuss words any more. Hugh will probably laugh at the method I have come up with. 1. Luger parts: Locate the frame, recoil lever, recoil lever PIN, main spring and main spring GUIDE ROD. 2. TOOLS: Pliers, tapered long pin punch or screw driver shaft that will fit through the guide rod hole, screw driver http://boards.rennlist.com/upload/MSpring1.jpg