Luger Mainspring Installation-Step 1
 

This is the way I have recently been installing them, takes me about 5 minutes. No jigs, no vices, just a few simple tools and I dont even need cuss words any more. Hugh will probably laugh at the method I have come up with.

1. Luger parts: Locate the frame, recoil lever, recoil lever PIN, main spring and main spring GUIDE ROD.

2. TOOLS: Pliers, tapered long pin punch or screw driver shaft that will fit through the guide rod hole, screw driver






http://boards.rennlist.com/upload/MSpring1.jpg

Thanks Thor, saved info to my harddrive! (EOM)
 

Re: Luger Ammo Adjustments and main springs
 

In a day or so, I will fix that one picture that is backwards, it is confusing! I have a small adjustment to make on one! It was not feeding right or locking bad, too much springola! Had one just like it last week, I am now adjusting to 124 fmj Remington's UMC yellow box standard pressure loading unless a customers requests other field tests! Thor

RE: Suggest changes in step #5 see my post there (EOM)