Shootin'

FNorm · 05-11-2009, 10:50 PM

Made it to the range today with some new toys. The mostly 41 byf ,this is one with at least 5 different serial numbers in it, a war bring back, shot really well. With any magazine, and three different length cartridges. Everything from Win. white label at 1.160 OAL, to my much shorter hand loads, 1.073 And accurately!

The 7.65 commercial has a problem. It loads and ejects just fine, but the firing pin isn't getting cocked upon return to battery. I can drop the magazine, pull back the toggle a half inch, let it go and it all fires again. So???? Any suggestions? This is with who knows how old ammo though. Still if it loads and ejects???? I've really got in there tonight and scrubbed everything down. Some dirt in the breech block. Try again next week. Then I might be talking with LugerDoc....

FN

05-11-2009, 10:50 PM	#1
FNorm Patron LugerForum Patron Join Date: Mar 2009 Location: Colorado Posts: 978 Thanks: 68 Thanked 127 Times in 108 Posts	Shootin' Made it to the range today with some new toys. The mostly 41 byf ,this is one with at least 5 different serial numbers in it, a war bring back, shot really well. With any magazine, and three different length cartridges. Everything from Win. white label at 1.160 OAL, to my much shorter hand loads, 1.073 And accurately! The 7.65 commercial has a problem. It loads and ejects just fine, but the firing pin isn't getting cocked upon return to battery. I can drop the magazine, pull back the toggle a half inch, let it go and it all fires again. So???? Any suggestions? This is with who knows how old ammo though. Still if it loads and ejects???? I've really got in there tonight and scrubbed everything down. Some dirt in the breech block. Try again next week. Then I might be talking with LugerDoc.... FN